Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA AF-1400II vs Hwacheon VESTA-1300B+.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
Hwacheon
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 12,000 RPM Highest RPM | 10,000 RPM |
| Spindle Motor Rating | 11.0 kW (14.8 HP) | -40.0 kW (-53.6 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 1,400 mm Longest X | 1,330 mm |
| Y-Axis Travel | 650 mm | 670 mm Longest Y |
| Z-Axis Travel | 610 mm | 650 mm Longest Z |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 24 Tools | -40 Tools |
| Rapid Traverse Rate | 48 m/min (1,890 ipm) | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | FANUC Oi-MF PLUS | Fanuc 0i-MF Plus |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 8,100 kg | -40 kg |
When evaluating AWEA AF-1400II vs Hwacheon VESTA-1300B+, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the AWEA AF-1400II offers high-speed finishing advantages with a top speed of 12,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.