Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA BM-2100 MAX vs SPINNER VC1150.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
SPINNER
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 6,000 RPM | 18,000 RPM Highest RPM |
| Spindle Motor Rating | 15.0 kW (20.1 HP) | Standard |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 2,100 mm | N/A |
| Y-Axis Travel | 1,000 mm | N/A |
| Z-Axis Travel | 1,000 mm | N/A |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 24 Tools | Standard ATC |
| Rapid Traverse Rate | 15 m/min (591 ipm) | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | FANUC Oi -MF Plus | Industrial CNC / PLC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 20,000 kg | Standard Industrial Weight |
When evaluating AWEA BM-2100 MAX vs SPINNER VC1150, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the SPINNER VC1150 offers high-speed finishing advantages with a top speed of 18,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.