Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA HVM-6032 vs AWEA AF-1400II.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 5-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | Standard | 12,000 RPM |
| Spindle Motor Rating | 22.0 kW (29.5 HP) More Power | 11.0 kW (14.8 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 6,000 mm Longest X | 1,400 mm |
| Y-Axis Travel | 3,900 mm Longest Y | 650 mm |
| Z-Axis Travel | 1,000 mm Longest Z | 610 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 60 Tools Largest ATC | 24 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | 48 m/min (1,890 ipm) |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | FANUC Oi-MF PLUS |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 57,000 kg Heaviest Base | 8,100 kg |
When evaluating AWEA HVM-6032 vs AWEA AF-1400II, shop managers must weigh spindle kinematics against overall structural rigidity. The AWEA HVM-6032 delivers a competitive edge in heavier stock removal with its 22.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.