Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA LP-7033 vs AWEA AH-630.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Horizontal Machining Centers (HMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 6,000 RPM | 10,000 RPM Highest RPM |
| Spindle Motor Rating | 22.0 kW (29.5 HP) | 22.0 kW (29.5 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 7,000 mm Longest X | 1,020 mm |
| Y-Axis Travel | 3,300 mm Longest Y | 900 mm |
| Z-Axis Travel | 760 mm | 900 mm Longest Z |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 32 Tools | 60 Tools Largest ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | FANUC Oi-MD |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 66,000 kg Heaviest Base | 16,500 kg |
When evaluating AWEA LP-7033 vs AWEA AH-630, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the AWEA AH-630 offers high-speed finishing advantages with a top speed of 10,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.