Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for AWEA SP-3016HSS vs AWEA LP-4021.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
AWEA
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 10 RPM | 6,000 RPM Highest RPM |
| Spindle Motor Rating | 18.5 kW (24.8 HP) | 22.0 kW (29.5 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 3,060 mm | 4,000 mm Longest X |
| Y-Axis Travel | 1,600 mm | 2,100 mm Longest Y |
| Z-Axis Travel | 760 mm | 760 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 32 Tools | 32 Tools |
| Rapid Traverse Rate | 20,000 mm/min (787.4 IPM) | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | Standard Industrial Weight | 37,500 kg |
When evaluating AWEA SP-3016HSS vs AWEA LP-4021, shop managers must weigh spindle kinematics against overall structural rigidity. The AWEA LP-4021 delivers a competitive edge in heavier stock removal with its 22.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.