Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Hardinge Bridgeport Series 1 Standard vs Haas Automation GM-2.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Hardinge
View Specs Page →
|
Haas Automation
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | United States | United States |
| Model Status / Year | 1938 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 4,200 RPM | 8,100 RPM Highest RPM |
| Spindle Motor Rating | 1.5 kW (2 HP) | 30.0 kW (40.2 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 762 mm | N/A |
| Y-Axis Travel | 305 mm | N/A |
| Z-Axis Travel | 406 mm | N/A |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 1 Tools | 30 Tools Largest ATC |
| Rapid Traverse Rate | 2.5 m/min | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Manual / 2-Axis CNC Retrofit | Standard CNC |
| MTConnect Telemetry Standard | Optional / Protocol Supported | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 950 kg | 20,200 kg Heaviest Base |
When evaluating Hardinge Bridgeport Series 1 Standard vs Haas Automation GM-2, shop managers must weigh spindle kinematics against overall structural rigidity. The Haas Automation GM-2 delivers a competitive edge in heavier stock removal with its 30.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.