Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Dener TDC 4120 vs Feeler FDM-7232.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Dener
View Specs Page →
|
Feeler
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 10,000 RPM Highest RPM | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW (29.5 HP) | Standard |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 4,100 mm | 7,200 mm Longest X |
| Y-Axis Travel | 2,020 mm | 3,100 mm Longest Y |
| Z-Axis Travel | 1,020 mm Longest Z | 800 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 40 Tools Largest ATC | 24 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | Standard Industrial Weight | Standard Industrial Weight |
When evaluating Dener TDC 4120 vs Feeler FDM-7232, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the Dener TDC 4120 offers high-speed finishing advantages with a top speed of 10,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.