Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Haas Automation VF-6/40TR vs AWEA MEGA5 P2526.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Haas Automation
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | 5-Axis Machining Centers |
| Controlled Axes | 5-Axis Simultaneous | 5-Axis Simultaneous |
| OEM Headquarters | United States | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 8,100 RPM | 24,000 RPM Highest RPM |
| Spindle Motor Rating | 30.0 kW (40.2 HP) | Standard |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 2,500 mm |
| Y-Axis Travel | N/A | 2,620 mm |
| Z-Axis Travel | N/A | 1,000 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools | 40 Tools Largest ATC |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | Standard CNC |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 26,100 kg | 33,000 kg Heaviest Base |
When evaluating Haas Automation VF-6/40TR vs AWEA MEGA5 P2526, shop managers must weigh spindle kinematics against overall structural rigidity. Conversely, the AWEA MEGA5 P2526 offers high-speed finishing advantages with a top speed of 24,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.