Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Hwacheon D3-5AX vs Hwacheon SIRIUS-650.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Hwacheon
View Specs Page →
|
Hwacheon
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 5-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | International | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 12,000 RPM Highest RPM | 5,000 RPM |
| Spindle Motor Rating | 12.0 kW (16.1 HP) | 18.5 kW (24.8 HP) More Power |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 800 mm | 1,300 mm Longest X |
| Y-Axis Travel | 650 mm | 650 mm |
| Z-Axis Travel | 575 mm | 650 mm Longest Z |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools Largest ATC | 24 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | High-Speed Rapid Feed |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Fanuc 0i-MF Plus (opt. Fanuc 31i-B5 Plus) | Fanuc 31i-B |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 15,580 kg Heaviest Base | 12,200 kg |
When evaluating Hwacheon D3-5AX vs Hwacheon SIRIUS-650, shop managers must weigh spindle kinematics against overall structural rigidity. The Hwacheon SIRIUS-650 delivers a competitive edge in heavier stock removal with its 18.5 kW spindle motor. Conversely, the Hwacheon D3-5AX offers high-speed finishing advantages with a top speed of 12,000 RPM. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.