Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Specialty Builder Supercell-300G vs Matsuura MAM72-35V.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Specialty Builder
View Specs Page →
|
Matsuura
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | 5-Axis Machining Centers |
| Controlled Axes | 5-Axis Simultaneous | 5-Axis Simultaneous |
| OEM Headquarters | International | Japan |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 20,000 RPM | 20,000 RPM |
| Spindle Motor Rating | Standard | 22.0 kW (29.5 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | 510 mm | 550 mm Longest X |
| Y-Axis Travel | 510 mm Longest Y | 440 mm |
| Z-Axis Travel | 460 mm | 580 mm Longest Z |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | Standard ATC | 240 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | 50 m/min |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Industrial CNC / PLC | Matsuura G-Tech 31i with Touchscreen |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | Standard Industrial Weight | 9,800 kg |
When evaluating Specialty Builder Supercell-300G vs Matsuura MAM72-35V, shop managers must weigh spindle kinematics against overall structural rigidity. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.