Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak FJV-35/80 vs AWEA BM-1400 MAX.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | CNC Vertical Machining Centers (VMC) | CNC Vertical Machining Centers (VMC) |
| Controlled Axes | 3-Axis Simultaneous | 3-Axis Simultaneous |
| OEM Headquarters | Japan | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 10,000 RPM Highest RPM | 6,000 RPM |
| Spindle Motor Rating | 30.0 kW (40.2 HP) More Power | 11.0 kW (14.8 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 1,400 mm |
| Y-Axis Travel | N/A | 800 mm |
| Z-Axis Travel | N/A | 700 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools Largest ATC | 24 Tools |
| Rapid Traverse Rate | High-Speed Rapid Feed | 20 m/min (787 ipm) |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | Standard CNC | FANUC Oi -MF Plus |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | 42,110 kg Heaviest Base | 13,000 kg |
When evaluating Mazak FJV-35/80 vs AWEA BM-1400 MAX, shop managers must weigh spindle kinematics against overall structural rigidity. The Mazak FJV-35/80 delivers a competitive edge in heavier stock removal with its 30.0 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.