Compare side-by-side engineering specifications, spindle torque, RPM, axis travels, tool capacity, CNC controllers, and digital telemetry standards for Mazak VC-500A/5X vs AWEA FV-960.
|
Specification Matrix
Verified OEM & MachineSchema Data
|
Mazak
View Specs Page →
|
AWEA
View Specs Page →
|
|---|---|---|
| 1. Machine Classification & Kinematics | ||
| Machine Type | 5-Axis Machining Centers | 5-Axis Machining Centers |
| Controlled Axes | 5-Axis Simultaneous | 5-Axis Simultaneous |
| OEM Headquarters | Japan | International |
| Model Status / Year | 2024 | 2024 |
| 2. Spindle Speed & Motor Power | ||
| Maximum Spindle Speed | 12,000 RPM | 12,000 RPM |
| Spindle Motor Rating | 18.5 kW (24.8 HP) More Power | 10.0 kW (13.4 HP) |
| 3. Work Envelope & Travels (X / Y / Z) | ||
| X-Axis Travel | N/A | 960 mm |
| Y-Axis Travel | N/A | 600 mm |
| Z-Axis Travel | N/A | 480 mm |
| Table Surface Dimensions | Standard Worktable | Standard Worktable |
| Maximum Table Payload | Standard Capacity | Standard Capacity |
| 4. Tool Changer (ATC) & Motion Rates | ||
| Tool Magazine Capacity | 30 Tools Largest ATC | 24 Tools |
| Rapid Traverse Rate | 42 m/min (1,654 ipm) | 32 m/min (1,260 ipm) |
| 5. CNC Control & Telemetry Standards | ||
| Standard CNC Controller | MAZATROL SmoothG CNC | HEIDENHAIN TNC640 (FANUC Oi -MF Plus / SIEMENS 840D Opt.) |
| MTConnect Telemetry Standard | ANSI/MTC1.4 Verified | ANSI/MTC1.4 Verified |
| 6. Machine Mass & Rigidity | ||
| Net Machine Weight | Standard Industrial Weight | 7,400 kg |
When evaluating Mazak VC-500A/5X vs AWEA FV-960, shop managers must weigh spindle kinematics against overall structural rigidity. The Mazak VC-500A/5X delivers a competitive edge in heavier stock removal with its 18.5 kW spindle motor. Both builders adhere to standardized industrial communication protocols, facilitating MTConnect machine monitoring across digital factory floors.
When selecting between competing machining centers or turning centers, specification sheets provide only the baseline. Experienced manufacturing engineers should analyze the following core metrics:
Check whether kW and torque are rated continuously or at 15-30 minute duty cycles for roughing operations.
Heavier meehanite cast-iron machine beds absorb cutting harmonics and damp vibrations during high-feed milling.
Ensure the control system supports high-speed look-ahead (G05.1/G08) and standard MTConnect IoT monitoring.