The AKS Cutting Systems accu-kut is an industrial-grade Fiber Laser Cutting Machines powered by the Hypertherm Edge Connect CNC controller. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AKS accu-kut: unitized CNC plasma table up to 10 ft (3.05 m) wide, +/- 0.003 in per 3 ft motion accuracy, 1,200 ipm (30.5 m/min).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AKS Cutting Systems (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Hypertherm Edge Connect CNC controller |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Motion Accuracy | +/- 0.003 in per 3 ft of motion (+/- 0.08 mm per 914 mm) |
| Rapid Traverse | 1,200 ipm (30.5 m/min) |
| Max Cut Depth | Up to 8 in (203 mm) thick material |
| Max Cut Width | Up to 10 ft (3.05 m) depending on machine size |
| Max Cut Length | Up to 60 ft (18.29 m) depending on machine size |
| Available Widths | 6, 8 and 10 ft (1.83, 2.44 and 3.05 m) |
| Available Lengths | 12, 24, 36 and 48 ft (3.66, 7.32, 10.97 and 14.63 m) |
| CNC Control | Hypertherm Edge Connect CNC controller |
| Operator Screen | 19 in (483 mm) color touch screen console |
| Software | Local license of ProNest 2025 |
| Frame | Modular, unitized and fully-welded frame |
| Torch | Hy-definition torch (standard) |
| Riser Spacer Blocks | 2, 3 or 4 in (51, 76 or 102 mm) |
The price estimate for the AKS Cutting Systems accu-kut is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/aks-cutting-systems-accu-kut#price; the request is passed to AKS Cutting Systems or an authorised dealer.
AKS lists available widths of 6, 8 and 10 ft (1.83, 2.44 and 3.05 m) and lengths of 12, 24, 36 and 48 ft (3.66, 7.32, 10.97 and 14.63 m). The specification block separately states a maximum cut length of up to 60 ft (18.29 m) depending on machine size, so longer builds should be confirmed with AKS.
The published figure is +/- 0.003 in per 3 ft accuracy of motion, at a travel speed of 1,200 ipm (30.5 m/min). AKS attributes it to the unitized, fully-welded frame design. For comparison, the dura-kut gantry is listed at +/- 0.006 in per 3 ft.
The specification lists a local license of ProNest 2025, and the control is the Hypertherm Edge Connect CNC controller with a 19 in (483 mm) color touch screen console. AKS also lists the SureCut suite, which applies optimized cutting parameters automatically.
With the water table, yes. AKS lists raise/lower controls that allow above-water or underwater cutting and notes that underwater cutting lowers the volume of the operation. The downdraft table can be exchanged for a water table as an upgrade.
They set pierce height. AKS offers 2, 3 or 4 in (51, 76 or 102 mm) riser spacer blocks and describes them as a way to get optimal pierce height adjustment, protect consumables and keep cutting consistent. They matter most on thick plate, where piercing throws the most molten metal back at the torch.
