The AKS Cutting Systems PLASMATIC is an industrial-grade Fiber Laser Cutting Machines powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AKS PLASMATIC: plug-and-play CNC plasma table, 1.25 in (32 mm) max cut depth, 800 ipm (20.3 m/min), cuts up to 6 ft (1.83 m) wide.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AKS Cutting Systems (International) |
| Machine Type | Fiber Laser Cutting Machines |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Motion Accuracy | +/- 0.010 in per 3 ft of motion (+/- 0.25 mm per 914 mm) |
| Rapid Traverse | 800 ipm (20.3 m/min) |
| Max Cut Depth | 1.25 in (32 mm) |
| Max Cut Width | Up to 6 ft (1.83 m) |
| Max Cut Length | Up to 12 ft (3.66 m) |
| Table Sizes | 5×10 and 6×12 |
| Table Type | Water table or downdraft table |
| Operator Screen | 19 in (483 mm) touchscreen with keyboard and mouse |
| Drive System | X-axis and Y-axis helical rack and pinion drives |
| Torch Height Control | Servo driven ball screw lifter with arc voltage control (Hypertherm Sensor technology) |
| Water Tank Capacity | 210 gallons (795 L) maximum |
| Machine Electrical Connection | 120 VAC, 1-phase, 15 FLA, 60 Hz |
The price estimate for the AKS Cutting Systems PLASMATIC is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/aks-cutting-systems-plasmatic#price; the request is passed to AKS Cutting Systems or an authorised dealer.
AKS lists a maximum cut depth of 1.25 in (32 mm). The cut envelope is up to 6 ft (1.83 m) wide and up to 12 ft (3.66 m) long. For thicker plate the tru-kut is listed with a 3 in (76 mm) maximum cut depth.
The floor plan for the standard layout shows an electrical connection of 120 VAC, 1-phase, 15 FLA at 60 Hz for the cutting machine. The plasma power supply has its own, larger supply, and the drawing tabulates separate requirements for each plasma unit, so the total depends on the plasma system ordered.
Either. AKS says the PLASMATIC features a water or downdraft table depending on what the operation needs. The floor plan gives a maximum tank water capacity of 210 gallons (795 L). A rust inhibitor additive and an air bubbler system are offered for water tables.
The PLASMATIC is slower and lighter. It is listed at 800 ipm (20.3 m/min) and a 1.25 in (32 mm) maximum cut depth with +/- 0.010 in per 3 ft motion accuracy. The tru-kut is listed at 1,200 ipm (30.5 m/min), 3 in (76 mm) and +/- 0.004 in per 3 ft.
