The ATLIX xBUILD 5000 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
ATLIX xBUILD 5000: 500 x 500 x 400 mm build volume, 4 x 1 kW TRUMPF fiber lasers, 30 - 150 μm layers, up to 450 cm³/h theoretical. Checked against ATLIX.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | ATLIX (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 6,900 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Build Volume | 500 x 500 x 400 mm (19.7 x 19.7 x 15.7 in) |
| Build Rate | 50 - 450 cm³/h (3.1 - 27.5 in³/h), theoretical, 4-laser exposure, recoating excluded |
| Layer Thickness | 30 - 150 μm |
| Laser Power | 4 x 1 kW |
| Number Of Lasers | 4 |
| Beam Diameter | 80 - 200 μm |
| Scan Speed | Max. 3 m/s (118 in/s) |
| Preheating | Up to 200 °C (392 °F) |
| Shielding Gas | Nitrogen, Argon |
| Filter Unit | Saturation, long-term |
| Power Supply | 400 V - 63 A - 50 Hz |
| Machine Dimensions | 2,250 x 3,600 x 2,500 mm (88.6 x 141.7 x 98.4 in) |
| Machine Weight | 6,900 kg (15,212 lb) |
The price estimate for the ATLIX xBUILD 5000 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/atlix-xbuild-5000#price; the request is passed to ATLIX or an authorised dealer.
Four. Laser power is listed as 4 x 1 kW from a TRUMPF fiber laser source, and the number of lasers is given as 4 with no optional variant. Beam diameter is 80 - 200 μm.
ATLIX lists 50 - 450 cm³/h (3.1 - 27.5 in³/h) and states that the figure is theoretical, for 4-laser exposure, with recoating excluded. Expect less in practice, because recoating takes time on every layer and not every layer loads all four lasers.
500 x 500 x 400 mm (19.7 x 19.7 x 15.7 in). The xBUILD 3000 has the same 400 mm (15.7 in) height on a 300 x 300 mm (11.8 x 11.8 in) plan, so the xBUILD 5000 adds plan area, not height.
The table lists 400 V - 63 A - 50 Hz. No other voltage or frequency is given for this model, so confirm with ATLIX what is available if your supply differs. Shielding gas is Nitrogen or Argon.
Machine dimensions are 2,250 x 3,600 x 2,500 mm (88.6 x 141.7 x 98.4 in) and the weight is 6,900 kg (15,212 lb). Check floor loading, the route into the building and ceiling clearance before ordering.
