The AWEA AF-650II is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the FANUC Oi - MF PLUS. It offers working travels of 650 x 510 x 510 mm, a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA AF-650II vertical machining center: 650 x 510 x 510 mm travels, direct-drive 12,000 rpm BT40 spindle, 48 m/min rapids, 24 tools, 4,200 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | FANUC Oi - MF PLUS |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 650 mm |
| Y-Axis Travel | 510 mm |
| Z-Axis Travel | 510 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BT40 |
| Table / Platter / Chuck Size | 750 x 510 mm (29.5 x 20.1 in) |
| Max Table Load Capacity | 500 kg |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Rapid Traverse Rate | 48 m/min (1,890 ipm) |
| Approx. Machine Weight | 4,200 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 650 mm (25.6 in) |
| Y Axis Travel | 510 mm (20.1 in) |
| Z Axis Travel | 510 mm (20.1 in) |
| Table Size | 750 x 510 mm (29.5 x 20.1 in) |
| Max Table Load | 500 kg (1,102 lb) |
| Distance Spindle Center To Column | 552 mm (21.7 in) |
| Distance Spindle Nose To Table | 100 ~ 610 mm (3.9 ~ 24.0 in) |
| T Slots | 14 mm x 100 mm x 4 |
| Spindle Taper | BT40 |
| Spindle Motor Power | 11 / 15 kW (14.8 / 20.1 hp) |
| Max Spindle Speed | Direct-drive 12,000 rpm |
| Rapid Traverse Xy | 48 m/min (1,890 ipm) |
| Rapid Traverse Z | 32 m/min (1,260 ipm) |
| Cutting Feed Rate | 15 m/min (591 ipm) |
| Tool Capacity | 24 T |
| Max Tool Length | 250 mm (9.8 in) |
| Max Tool Weight | 7 kg (15 lb) |
| Max Tool Diameter | Ø75 / Ø150 mm (Ø3.0 / Ø5.9 in) |
| Positioning Accuracy | 0.006 mm |
| Repeatability | 0.005 mm |
| CNC Control | FANUC Oi - MF PLUS |
| Air Pressure Requirement | 6 kg/cm² |
| Power Requirement | 25 kVA |
| Coolant Tank Capacity | 270 liter |
| Machine Weight | 4,200 kg (9,259 lb) |
The price estimate for the AWEA AF-650II is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-af-650ii#price; the request is passed to AWEA or an authorised dealer.
X travel is 650 mm (25.6 in), Y is 510 mm (20.1 in) and Z is 510 mm (20.1 in). The table is 750 x 510 mm (29.5 x 20.1 in) with four 14 mm T-slots on a 100 mm pitch, and it is rated for 500 kg (1,102 lb). Spindle nose to table distance runs from 100 to 610 mm (3.9 ~ 24.0 in).
A BT40 direct-drive spindle with a maximum of 12,000 rpm and a motor rated 11 / 15 kW (14.8 / 20.1 hp), continuous and 30 min. AWEA says the direct-drive layout keeps motor heat away from the spindle to reduce deformation, and that a floating hydraulic tool release takes the unclamping pressure off the spindle bearings.
Only in length. The AF-800II has 800 mm (31.5 in) of X travel and an 860 x 510 mm (33.9 x 20.1 in) table, and weighs 5,000 kg (11,023 lb) against 4,200 kg (9,259 lb) for the AF-650II. Y and Z travel, table load, spindle, rapids and tool changer are the same on both, so the choice comes down to part length and floor space.
The arm type changer holds 24 tools. Each tool can be up to 250 mm (9.8 in) long and 7 kg (15 lb). The maximum diameter is Ø75 mm with every pocket full and Ø150 mm when the adjacent pockets are left empty. AWEA notes that tool specifications may vary with the size of the tool magazine.
AWEA lists a power requirement of 25 kVA and a pneumatic pressure requirement of 6 kg/cm². The coolant tank holds 270 liter, and AWEA describes it as an independent tank that is easy to reach for maintenance. Machine weight is 4,200 kg (9,259 lb).
