The AWEA HTP-5041 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 5000 x 0 x 1000 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HTP-5041: 5,000 mm X travel, 4,300 mm between columns, 5,020 x 3,000 mm table for 18,000 kg, 4,000 rpm gear spindle, 1,300 liter coolant tank.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 0 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (ISO 50) |
| Table / Platter / Chuck Size | 5,020 x 3,000 mm (197.6 x 118.1 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 49,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | Opt.4,100 mm (4,800) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400) |
| Table Size | 5,020 x 3,000 mm (197.6 x 118.1 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Between Columns | 4,300 mm (169.3 in) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) (Opt. 200 ~ 1,400 / 200 ~ 1,600) |
| Spindle Taper | BBT50 (ISO 50) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) (Opt. 30 / 37) |
| Max Spindle Speed | Gear Spindle 4,000 rpm |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Yz | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5 m/min (39 ~ 197 ipm) |
| Tool Capacity | 32 T (Opt. 40 / 60 / 90 / 120) |
| Max Tool Length | 350 mm (13.8 in) (Opt. 400) |
| Max Tool Weight | 20 kg (44 lb) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.030 mm |
| Coolant Tank Capacity | 1,300 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 49,000 kg (108,025 lb) |
The price estimate for the AWEA HTP-5041 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-htp-5041#price; the request is passed to AWEA or an authorised dealer.
Two coil type chip augers and a caterpillar type chip conveyor are standard on the HTP series. This model's coolant tank is 1,300 liter. AWEA says the tank reduces cutting fluid heating, which helps accuracy over long cycles.
The HTP-5025 has 2,700 mm (106.3 in) between the columns and weighs 45,000 kg (99,206 lb). The HTP-5033 has 3,500 mm (137.8 in) and weighs 47,000 kg (103,616 lb). The HTP-5041 has 4,300 mm (169.3 in) and weighs 49,000 kg (108,025 lb). All three carry 18,000 kg (39,683 lb) and share the VDI accuracy figures.
Roller type linear guide ways on all three axes. AWEA describes 4 guideways on the base for the X-axis, a stepped offset three guideways design for the Y-axis and two guideways on each side of the headstock for Z. Position feedback is semi-closed loop, with encoders directly connected to the ball screws.
The air pressure requirement is listed as 5 ~ 8 kg/cm². No flow figure is given in the specification, and the electrical supply row carries no kVA value, so both should be requested from AWEA for site planning.
