The AWEA HTP-6025 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 6000 x 2500 x 1000 mm, a top spindle speed of 4,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA HTP-6025: 6,000 x 2,500 x 1,000 mm bridge machining center with a 20,000 kg table load, BBT50 gear spindle at 4,000 rpm and 49,000 kg weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 2,500 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (ISO 50) |
| Table / Platter / Chuck Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 49,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 2,500 mm (98.4 in) (Opt. 3,200) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) (Opt. 200 ~ 1,400 / 200 ~ 1,600) |
| Spindle Taper | BBT50 (ISO 50) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) (Opt. 30 / 37) |
| Max Spindle Speed | Gear Spindle 4,000 rpm |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Yz | 12 m/min (472 ipm) |
| Cutting Feed Rate | 1 ~ 5 m/min (39 ~ 197 ipm) |
| Tool Capacity | 32 T (Opt. 40 / 60 / 90 / 120) |
| Max Tool Length | 350 mm (13.8 in) (Opt. 400) |
| Max Tool Weight | 20 kg (44 lb) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Coolant Tank Capacity | 900 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 49,000 kg (108,025 lb) |
The price estimate for the AWEA HTP-6025 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-htp-6025#price; the request is passed to AWEA or an authorised dealer.
AWEA's table gives 1 ~ 5 m/min (39 ~ 197 ipm) for the HTP-6025 and 1 ~ 10 m/min (39 ~ 394 ipm) for the HTP-4025 and HTP-5025. The maker does not state a reason. For planning, treat 5 m/min as the ceiling for programmed feed on this model.
JIS: ± 0.015 mm over full travel for positioning and ± 0.003 mm for repeatability. VDI: P ≤ 0.050 mm over full travel and Ps ≤ 0.035 mm. The VDI values are wider than the P ≤ 0.030 mm and Ps ≤ 0.025 mm of the HTP-4025, as expected over a longer axis.
49,000 kg (108,025 lb). With a full table that is a further 20,000 kg (44,092 lb) on the foundation. The hydraulic tank holds 100 liter, the lubrication tank 6 liter and the coolant tank 900 liter.
AWEA lists two coil type chip augers and a caterpillar type chip conveyor as standard on the HTP series. The coolant tank on this model is 900 liter; the wider HTP-6033 has 1,050 liter.
