The AWEA LG-10030 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 3000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10030 gantry 5-face machining center: 10,000 x 3,000 x 1,000 mm travels, 10,000 x 2,800 mm fixed table at 2,500 kg/m², 20 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 3,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 2,800 mm (393.7 x 110.2 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 3,000 mm (118.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 2,800 mm (393.7 x 110.2 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 3,800 mm (3,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.020 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,300 liter |
The price estimate for the AWEA LG-10030 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-10030#price; the request is passed to AWEA or an authorised dealer.
Only X is affected. The LG-10030 is listed at P = 0.050 mm for X positioning and Ps = 0.038 mm for repeatability under VDI. The LG-6030 is listed at P = 0.035 mm and Ps = 0.026 mm, and the LG-8030 at P = 0.040 mm and Ps = 0.030 mm. Y and Z are P = 0.025 mm and Ps = 0.020 mm on all three.
Width. The LG-10040 has 4,000 mm (157.5 in) of Y, a 10,000 x 3,800 mm (393.7 x 149.6 in) table and a 1,600 liter coolant tank, and its Y and Z positioning is P = 0.030 mm. The LG-10030 has 3,000 mm (118.1 in) of Y, a 2,800 mm wide table, 1,300 liter of coolant and P = 0.025 mm on Y and Z. X travel, X rapid and X accuracy are the same.
The rating is 2,500 kg/m², and because the table is fixed the load does not affect axis motion. AWEA describes a double layer structure that can endure super heavy work-pieces without deformation and a floor type design that attaches the table firmly to the base to damp vibration.
For X travels of 6 m and above AWEA uses its patented zero backlash rack & pinion combined with a high resolution linear scale, and the X-axis runs under AWEA's synchronous servo control. The listed rapid is 20 m/min (787 ipm).
