The AWEA LG-10040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 4000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10040: 10,000 x 4,000 x 1,000 mm gantry type 5-face machining center, 10,000 x 3,800 mm fixed table, 20 m/min X rapid, CAT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 3,800 mm (393.7 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 3,800 mm (393.7 x 149.6 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 4,800 mm (4,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.025 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,600 liter |
The price estimate for the AWEA LG-10040 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-10040#price; the request is passed to AWEA or an authorised dealer.
Four: the LG-10030 with 3,000 mm (118.1 in) of Y, the LG-10040 with 4,000 mm (157.5 in), the LG-10050 with 5,000 mm (196.9 in) and the LG-10070 with 7,000 mm (275.6 in). All four are listed with an X rapid of 20 m/min (787 ipm), X positioning of P = 0.050 mm and repeatability of Ps = 0.038 mm.
When 3,800 mm of table width is enough. The LG-10040 moves across Y at 15 m/min (591 ipm) and holds P = 0.030 mm on Y and Z. The LG-10050, with a 10,000 x 4,800 mm (393.7 x 189.0 in) table, is listed at 12 m/min (472 ipm) and P = 0.040 mm. The LG-10050 carries 1,900 liter of coolant against 1,600 liter here.
AWEA fits two rotating chip augers on both sides of the working table, feeding a separate type coolant tank that the specification lists at 1,600 liter. Because the table is fixed, chips are not carried about by a moving table; they have to be washed or swept to the augers at the table edges.
The LG-6040 and LG-8040 use the same rack and pinion X drive, the same spindle range and the same 4,800 mm between columns. AWEA says the working table and side columns are modular and that X travel could be extended on that basis. The LG-5040 is the exception in this width, with a ball screw X axis at 10 m/min (394 ipm).
