The AWEA LG-10070 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 7000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-10070: gantry 5-face machining center with a 7,000 mm Y crossbeam, 10,000 mm X travel, 10,000 x 6,800 mm fixed table and CAT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 7,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 10,000 x 6,800 mm (393.7 x 267.7 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 7,000 mm (275.6 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 10,000 x 6,800 mm (393.7 x 267.7 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 7,800 mm (7,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 10 m/min (394 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.050 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.040 mm / Full Travel (Optical linear scale) |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.038 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.030 mm (Optical linear scale) |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 2,100 liter |
The price estimate for the AWEA LG-10070 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-10070#price; the request is passed to AWEA or an authorised dealer.
It deals with the sag of a very wide beam. AWEA describes it as a patented design that minimises the deformation caused by the weight of the 7,000 mm super wide crossbeam while keeping machining accuracy. The LG-10070 and the LG-20070 are the two models in the spec tables with that crossbeam.
Width. The LG-10070 has 7,000 mm (275.6 in) of Y travel and a 10,000 x 6,800 mm (393.7 x 267.7 in) table; the LG-10050 has 5,000 mm (196.9 in) of Y and a 10,000 x 4,800 mm (393.7 x 189.0 in) table. Against the LG-10050, Y rapid is 10 m/min (394 ipm) instead of 12 m/min (472 ipm) and the coolant tank is 2,100 liter instead of 1,900 liter. X travel, X rapid and X accuracy are the same.
For Y/Z, the table says so: P = 0.040 mm / Full Travel (Optical linear scale) and Ps = 0.030 mm (Optical linear scale). For X, AWEA states that models with X-axis travel 6 m and above combine a rack & pinion drive with a 1µm high resolution linear scale, and the listed figures are P = 0.050 mm and Ps = 0.038 mm.
The distance between columns is listed as 7,800 mm (7,500 mm), the second figure with the water eliminator fitted. The table is 6,800 mm wide and Y travel is 7,000 mm (275.6 in). Height under the spindle nose runs from 200 ~ 1,200 mm (7.9 ~ 47.2 in).
The air pressure requirement is 5 ~ 8 kg/cm². Electrical supply is 80 kVA at 220 ±10 % Vac 3 phase 50 / 60 Hz, the same as the rest of the range. The hydraulic tank holds 120 liter and the lubrication tank 6 liter.
