The AWEA LG-5030 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 3000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-5030: gantry type 5-face machining center with 5,000 x 3,000 x 1,000 mm travels, twin ball screw X axis, 10 m/min X rapid, CAT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 3,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 5,000 x 2,800 mm (196.9 x 110.2 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,000 mm (118.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 5,000 x 2,800 mm (196.9 x 110.2 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 3,800 mm (3,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.030 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.022 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.020 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,300 liter |
The price estimate for the AWEA LG-5030 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-5030#price; the request is passed to AWEA or an authorised dealer.
AWEA does not give a reason; the table simply lists 10 m/min (394 ipm) for this machine and 12 m/min (472 ipm) for the LG-4030. Both use the twin ball screw drive, and the LG-5030 has the longer screws. Y and Z rapids are the same on the two models at 15 m/min (591 ipm) and 10 m/min (394 ipm).
The LG-6030 adds 1,000 mm of X, to 6,000 mm (236.2 in), and its rack and pinion drive doubles the X rapid to 20 m/min (787 ipm). The LG-5030 answers with closer X figures, P = 0.030 mm and Ps = 0.022 mm, where the LG-6030 is listed at P = 0.035 mm and Ps = 0.026 mm. Y, Z, spindle, magazine and table load are the same on both.
The distance between columns is 3,800 mm, or 3,500 mm with the water eliminator in place. The table itself is 2,800 mm (110.2 in) wide and Y travel is 3,000 mm (118.1 in), so Y travel is a little more than the table width. Height under the spindle nose is 200 ~ 1,200 mm (7.9 ~ 47.2 in).
Two rotating chip augers run along both sides of the working table and feed a separate coolant tank, which the table lists at 1,300 liter. AWEA's point is that a tank standing apart from the machine is easier to maintain. The lubrication tank holds 6 liter and the hydraulic unit 120 liter.
