The AWEA LG-5040 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 4000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-5040: gantry 5-face machining center, 5,000 x 4,000 x 1,000 mm travels, 5,000 x 3,800 mm fixed table, ball screw X axis, 32 tools (60 opt.).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 4,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 5,000 x 3,800 mm (196.9 x 149.6 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 4,000 mm (157.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 5,000 x 3,800 mm (196.9 x 149.6 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 4,800 mm (4,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 (60 Opt.) |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.030 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.022 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.025 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,600 liter |
The price estimate for the AWEA LG-5040 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-5040#price; the request is passed to AWEA or an authorised dealer.
A metre of width. Y travel is 4,000 mm (157.5 in) against 3,000 mm (118.1 in) on the LG-5030, and the table is 5,000 x 3,800 mm (196.9 x 149.6 in). The coolant tank is 1,600 liter and a 60-tool magazine is listed as an option. In exchange, Y and Z positioning is P = 0.030 mm where the LG-5030 holds P = 0.025 mm.
Ball screw. AWEA describes 2 sets of large size ball screws, servo motors and optical linear scales, driven by simultaneous servo control, for models with 4 m or 5 m of X travel. That gives the LG-5040 an X rapid of 10 m/min (394 ipm). The LG-6040 has the rack and pinion drive and is listed at 20 m/min (787 ipm).
The table lists 32 as standard and 60 as an option. Tools can be up to Ø127 mm (Ø5.0 in), or 215 mm (8.5 in) with adjacent pockets empty, up to 350 mm (13.8 in) long and 20 kg (44 lb). The floor type magazine is placed on the back of the machine.
No. Y rapid is 15 m/min (591 ipm), the same as on the narrower LG-5030. It only falls on the widest LG machines: the LG-6050, with 5,000 mm (196.9 in) of Y, is listed at 12 m/min (472 ipm).
