The AWEA LG-6030 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 3000 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LG-6030 gantry 5-face machining center: 6,000 x 3,000 x 1,000 mm, rack and pinion X at 20 m/min (787 ipm), fixed 2,500 kg/m² table, CAT50.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,000 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | CAT50 (7 / 24) |
| Table / Platter / Chuck Size | 6,000 x 2,800 mm (236.2 x 110.2 in) |
| Max Table Load Capacity | 2,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,000 mm (118.1 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 6,000 x 2,800 mm (236.2 x 110.2 in) |
| Max Table Load | 2,500 kg/m² |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns With Water Eliminator | 3,800 mm (3,500 mm) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | Gear 4,000 rpm (Std.) ; Gear 5,000 / 6,000 rpm (Opt.) ; Built-in 6,000 / 8,000 rpm (Opt.) |
| Spindle Taper | CAT50 (7 / 24) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 15 m/min (591 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 32 |
| Max Tool Diameter | Ø127 / 215 mm (Ø5.0 / 8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.025 / Full Travel |
| Positioning Accuracy X Vdi 3441 | P = 0.035 mm |
| Positioning Accuracy Yz Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.026 mm |
| Repeatability Yz Vdi 3441 | Ps = 0.020 mm |
| Power Requirement | 80 kVA 220 ±10 % Vac 3 phase 50 / 60 Hz |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,300 liter |
The price estimate for the AWEA LG-6030 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lg-6030#price; the request is passed to AWEA or an authorised dealer.
The X drive. The LG-5030 uses twin ball screws and is listed at 10 m/min (394 ipm) in X. The LG-6030 uses AWEA's patented zero backlash rack & pinion with a linear scale and is listed at 20 m/min (787 ipm). X positioning under VDI is P = 0.035 mm here with Ps = 0.026 mm repeatability, where the LG-5030 holds P = 0.030 mm and Ps = 0.022 mm.
AWEA describes roller type linear guide ways on the Z-axis, chosen to combine the heavy cutting of a box way with the fast movement and low abrasion of a linear guide. The Y-axis roller guide ways are offset from each other, which AWEA says raises rigidity and brings the spindle closer to the crossbeam.
The distance from spindle nose to table top is 200 ~ 1,200 mm (7.9 ~ 47.2 in) and Z travel is 1,000 mm (39.4 in). Tool length, up to 350 mm (13.8 in) from the gauge line, and any milling head fitted come out of that clearance, so tall parts should be checked against the actual head and tool in use.
The series is designed for it, but the equipment is selectable. AWEA says the LG series could be equipped with an automatic head changer and a vertical / horizontal ATC system to work as a 5-face machining center, and that the automatic milling head can be controlled by programming. Confirm which heads are included in the order.
AWEA states a maximum of 982 Nm at 253 rpm for the 4,000 rpm gear spindle, which uses a 26 kW (35 HP) motor and a 2-speed gearbox. The optional built-in spindles, at 6,000 rpm and 8,000 rpm, provide a maximum of 600 Nm at 350 rpm.
