The AWEA LP-2516YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 2500 x 1900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-2516YF 5-face bridge machining center: 2,500 x 1,900 x 760 mm travels, 2,310 x 1,500 mm table, 8,000 kg load, 6,000 rpm BT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,500 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 26,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,500 mm (98.4 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Distance Spindle Nose To Table | 400 ~ 1,160 mm (15.7 ~ 45.7 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.020 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 26,500 kg (58,422 lb) |
The price estimate for the AWEA LP-2516YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-2516yf#price; the request is passed to AWEA or an authorised dealer.
The table, load, X travel and Z travel are the same. This machine has 1,900 mm (74.8 in) of Y, a spindle nose range of 400 ~ 1,160 mm, magazine options of 60 and 90 tools, a 680 liter coolant tank and a weight of 26,500 kg (58,422 lb). The LP-2516 lists 1,600 mm (63.0 in) of Y, 240 ~ 1,000 mm (9.4 ~ 39.4 in) at the nose, a 40-tool option, 420 liter of coolant and 26,000 kg (57,319 lb).
The table lists 1,900 mm of Y travel and 1,700 mm between the columns, and AWEA does not comment on it. On a 5-face machine the ram must move beyond the edge of the workpiece so that a horizontal head can face inward and reach the side. The part itself still has to pass between the columns and sit on a table 1,500 mm wide.
It can be. With the spindle at the bottom of its 760 mm (29.9 in) stroke the nose is still 400 mm (15.7 in) above the table. A face mill on a short holder will not reach a thin plate lying on the table. Tools may be up to 400 mm long, but for flat work it is simpler to raise the part on parallels or a sub-plate.
AWEA describes an automatic head storage magazine with two cabinets, one for the horizontal head and one for the spindle cap. The exchange slides on linear guide ways, and each cabinet has its own swing door that opens only while a head is being exchanged, which AWEA says keeps contamination out of the storage.
For the 6,000 rpm high torque spindle AWEA states a 26 kW motor and a maximum of 642 N-m at 387 rpm, through a 2-speed gear box. The optional direct drive spindles reach 8,000 or 10,000 rpm and give a maximum of 165 N-m at 1,500 rpm, so they suit finishing and lighter cuts.
