The AWEA LP-2516YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 2500 x 1900 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-2516YZF 5-face bridge machine: 2,500 x 1,900 x 1,000 mm travels, 4,000 rpm gear spindle (977 N-m), 2,310 x 1,500 mm table, 8,000 kg load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,500 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load Capacity | 8,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 26,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,500 mm (98.4 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Table Size | 2,310 x 1,500 mm (90.9 x 59.1 in) |
| Max Table Load | 8,000 kg (17,637 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.020 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 26,500 kg (58,422 lb) |
The price estimate for the AWEA LP-2516YZF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-2516yzf#price; the request is passed to AWEA or an authorised dealer.
Z travel and the spindle. The LP-2516YZF has 1,000 mm (39.4 in) of Z, a spindle nose range of 200 ~ 1,200 mm (7.9 ~ 47.2 in) and a 4,000 rpm standard spindle. The LP-2516YF has 760 mm (29.9 in) of Z, a range of 400 ~ 1,160 mm (15.7 ~ 45.7 in) and 6,000 rpm as standard. X, Y, table, load, rapids and the listed weight of 26,500 kg (58,422 lb) are the same on both.
AWEA states that the 4,000 rpm high torque spindle has a 26 kW motor and a maximum torque output of 977 N-m at 254 rpm. It is driven through a 2-speed gear box, and a floating hydraulic tool release takes the unclamping force off the spindle bearing. The spec table gives motor power as 22 / 26 kW (30 / 35 HP).
Two families are listed. The built-in motorized spindles run at 6,000 or 8,000 rpm, and AWEA gives a maximum of 600 N-m at 350 rpm for them. The direct drive spindles run at 8,000 or 10,000 rpm with a maximum of 165 N-m at 1,500 rpm. All are options on this model; the taper stays BT50 (ISO50), with DIN69871-A optional.
The limit is the 1,200 mm (47.2 in) between spindle nose and table at the top of the stroke, less the tool. With a tool of the maximum 400 mm (15.7 in) length in the spindle, the clearance over the table is reduced accordingly, and a milling head takes further height. Work it out from the part, the fixture and the longest tool before committing.
