The AWEA LP-3016YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3000 x 1900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-3016YF: 5-face bridge machine with 3,000 x 1,900 x 760 mm travels, 3,260 x 1,500 mm table, 10,000 kg load and 20,000 mm/min X and Y rapids.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load Capacity | 10,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 29,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,260 x 1,500 mm (128.3 x 59.1 in) |
| Max Table Load | 10,000 kg (22,046 lb) |
| Distance Spindle Nose To Table | 400 ~ 1,160 mm (15.7 ~ 45.7 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 20,000 mm/min (787 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.020 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 29,000 kg (63,933 lb) |
The price estimate for the AWEA LP-3016YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-3016yf#price; the request is passed to AWEA or an authorised dealer.
Decide on part width. The LP-3016YF has 1,700 mm (66.9 in) between the columns, a 1,500 mm wide table and 1,900 mm (74.8 in) of Y, and its Y axis rapids at 20,000 mm/min (787 ipm). The LP-3021YF has 2,300 mm (90.6 in) between the columns, 2,400 mm (94.5 in) of Y and a 3,020 x 2,010 mm table, with a 15,000 mm/min (591 ipm) Y rapid. Both carry 10,000 kg (22,046 lb).
AWEA gives two sets of figures. Under JIS the positioning accuracy is ± 0.015 mm over full travel with ± 0.003 mm repeatability. Under VDI the values are P ≤ 0.025 mm over full travel and Ps ≤ 0.020 mm. The VDI figures are the ones that change with machine length, so use them when comparing sizes.
The maker places the X-axis ball screw in the centre of the axis within a wide span symmetrical layout, and says this avoids yawing and uneven wear of the guide ways. A ball screw vibration absorber is fitted to reduce vibration of the long screw. The base for this size is described as a one-piece structure with 2 roller type linear guide ways.
The table lists 6,000 rpm as the base speed and direct drive spindles of 8,000 / 10,000 rpm as options, all on a BT50 (ISO50) taper with DIN69871-A optional. Motor power is 22 / 26 kW (30 / 35 HP). If a direct drive spindle is chosen, AWEA notes that the Z axis can be built with roller type linear guide ways instead of the box way.
