The AWEA LP-4016 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4000 x 1600 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-4016 bridge machining center with 4,000 mm X and 1,600 mm Y travel, 4,200 x 1,500 mm table, 12,000 kg load and a 6,000 rpm BT50 spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 4,200 x 1,500 mm (165.4 x 59.1 in) |
| Max Table Load Capacity | 12,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 33,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,200 x 1,500 mm (165.4 x 59.1 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (40 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (7.5 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 420 liter (1.5 HP) |
| Machine Weight | 33,000 kg (72,751 lb) |
The price estimate for the AWEA LP-4016 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-4016#price; the request is passed to AWEA or an authorised dealer.
AWEA lists 15,000 mm/min (591 ipm) for the LP-4016 and 20,000 mm/min (787 ipm) for the LP-3016 without giving a reason. A longer ball screw has a lower critical speed, and that is the usual cause on machines of this kind. Y is unaffected and stays at 20,000 mm/min on both models.
They weigh the same, 33,000 kg (72,751 lb), so the question is the shape of the work. The LP-4016 gives 4,000 mm (157.5 in) of X on a 1,500 mm wide table and carries 12,000 kg (26,455 lb). The LP-3021 gives 3,000 mm (118.1 in) of X, 2,100 mm (82.7 in) of Y and 2,300 mm (90.6 in) between the columns, and carries 10,000 kg (22,046 lb).
Nearly the whole capacity block. The SP-4016 lists the same 4,000 mm X, 1,600 mm Y and 760 mm Z travels, the same 4,200 x 1,500 mm table, the same 12,000 kg load and the same 15,000 mm/min X rapid. The SP-4016 weighs 28,000 kg (61,728 lb) against 33,000 kg (72,751 lb), and its spindle nose sits 200 ~ 960 mm (7.9 ~ 37.8 in) above the table.
The distance runs from 240 mm to 1,000 mm (9.4 ~ 39.4 in), matching the 760 mm Z stroke. Tools may be up to 400 mm (15.7 in) long, so a long boring bar over a tall fixture uses up that height quickly. Check the stack of fixture, part and tool before quoting a job.
