The AWEA LP-4016YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 1900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-4016YF 5-face bridge type machining center: 4,000 mm X, 1,900 mm Y, 4,200 x 1,500 mm table for 12,000 kg, 6,000 rpm BT50, 32 to 90 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 1,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 4,200 x 1,500 mm (165.4 x 59.1 in) |
| Max Table Load Capacity | 12,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 33,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 1,900 mm (74.8 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,200 x 1,500 mm (165.4 x 59.1 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Spindle Nose To Table | 400 ~ 1,160 mm (15.7 ~ 45.7 in) |
| Distance Between Columns | 1,700 mm (66.9 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 20,000 mm/min (787 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 , 90 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 680 liter (1.5 HP) |
| Machine Weight | 33,000 kg (72,751 lb) |
The price estimate for the AWEA LP-4016YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-4016yf#price; the request is passed to AWEA or an authorised dealer.
Not according to AWEA's tables. Both are listed at 33,000 kg (72,751 lb). The LP-4016 has 1,600 mm (63.0 in) of Y travel, 240 ~ 1,000 mm (9.4 ~ 39.4 in) from spindle nose to table and a 120 liter hydraulic tank with a 7.5 HP pump. The LP-4016YF has 1,900 mm of Y, 400 ~ 1,160 mm at the nose and a 10 HP hydraulic pump on the same 120 liter tank.
The standard magazine holds 32 tools, with 60 and 90 listed as options. Maximum tool diameter is Ø127 mm (Ø5.0 in) with all pockets full and Ø215 mm (Ø8.5 in) with adjacent pockets empty. Maximum length is 400 mm (15.7 in) and maximum weight 20 kg (44 lb). AWEA says the vertical / horizontal ATC system uses sensors and sequence scanning during the change.
X rapids at 15,000 mm/min (591 ipm), Y at 20,000 mm/min (787 ipm) and Z at 15,000 mm/min. The cutting feed range is 1 ~ 10,000 mm/min (0.04 ~ 394 ipm). The shorter LP-3016YF is faster on X at 20,000 mm/min, and the LP-5016YF is slower at 10,000 mm/min (394 ipm).
The maker states that all milling heads are developed and assembled in house, and that the contact surfaces of heads and covers are hand scraped. The storage magazine has two cabinets, for the horizontal head and the spindle cap. Which head is supplied, and whether it indexes automatically, is not in the specification table, so it has to be settled in the quotation.
