The AWEA LP-4033YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 4000 x 3900 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-4033YF 5-face bridge machine: 4,000 x 3,900 x 760 mm travels, 3,500 mm between columns, 15,000 kg table load, BT50 6,000 rpm spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 3,900 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load Capacity | 15,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 44,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 3,900 mm (153.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,020 x 2,400 mm (158.3 x 94.5 in) |
| Max Table Load | 15,000 kg (33,069 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 15,000 mm/min (591 ipm) |
| Rapid Traverse Y | 10,000 mm/min (394 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 10,000 mm/min (0.04 ~ 394 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.025 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,000 liter (1.5 HP) |
| Machine Weight | 44,000 kg (97,002 lb) |
The price estimate for the AWEA LP-4033YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-4033yf#price; the request is passed to AWEA or an authorised dealer.
The head changer and the vertical / horizontal tool changer are part of the machine, and the travels are set for them. Y travel is 3,900 mm (153.5 in) against 3,300 mm (129.9 in) standard on the LP-4033, and the coolant tank is 1,000 liter against 750 liter. The table, 4,020 x 2,400 mm (158.3 x 94.5 in) for 15,000 kg (33,069 lb), and the 3,500 mm (137.8 in) between columns are the same on both.
AWEA describes an automatic head storage magazine with two cabinets, one for the horizontal head and one for the spindle cap. The heads slide on linear guide ways for the exchange. Each cabinet has its own swing door that opens only during a change, which keeps chips and coolant out of the stored head.
The distance from spindle nose to table runs from 200 mm to 960 mm (7.9 ~ 37.8 in), with 760 mm (29.9 in) of Z travel. Tool length, up to 350 mm (13.8 in), and any fixture height come off that. For taller work the LP-4033YZF has 1,000 mm (39.4 in) of Z and a nose-to-table distance of 200 ~ 1,200 mm (7.9 ~ 47.2 in).
The standard ATC holds 32 tools, with 60, 90 and 120 positions listed as options. A tool may be up to 350 mm (13.8 in) long and 20 kg (44 lb). Diameter is Ø127 mm (Ø5.0 in) with neighbouring pockets filled and Ø215 mm (Ø8.5 in) with them empty.
If the parts fit, the shorter machine moves faster and holds tighter figures. Its X rapid is 15,000 mm/min (591 ipm) and its positioning accuracy P ≤ 0.030 mm, where the LP-5033YF lists 10,000 mm/min (394 ipm) and P ≤ 0.040 mm. At 44,000 kg (97,002 lb) it is also lighter than the LP-5033YF, which weighs 48,000 kg (105,820 lb).
