The AWEA LP-6021YF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 2400 x 760 mm, a top spindle speed of 6,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6021YF 5-face bridge machining center: 6,000 mm X travel, 6,020 x 2,010 mm table, 18,000 kg load, 5,000 mm/min cutting feed, BT50.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 2,400 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 45,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 2,400 mm (94.5 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 6,020 x 2,010 mm (237.0 x 79.1 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 2,300 mm (90.6 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm ; Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.015 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 650 liter (1.5 HP) |
| Machine Weight | 45,000 kg (99,206 lb) |
The price estimate for the AWEA LP-6021YF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-6021yf#price; the request is passed to AWEA or an authorised dealer.
5,000 mm/min (197 ipm); the table row reads 1 ~ 5,000 mm/min (0.04 ~ 197 ipm). The LP-5021YF is listed at 1 ~ 8,000 mm/min (0.04 ~ 315 ipm) and the LP-4021YF at 1 ~ 10,000 mm/min (0.04 ~ 394 ipm), so the feed limit drops with each step in length.
The machine weighs 45,000 kg (99,206 lb) and its table is rated for 18,000 kg (39,683 lb). Plan the foundation for both figures together, since a fully loaded table adds the workpiece and its fixtures to the machine weight.
That depends on the tolerance over the length involved. AWEA lists P ≤ 0.050 mm over full travel and Ps ≤ 0.035 mm under VDI, and ± 0.015 mm over full travel with ± 0.003 mm repeatability under JIS. Compare the print against the standard your inspection uses.
The LP-6025YF is wider and heavier: a 6,020 x 2,400 mm (237.0 x 94.5 in) table, 3,200 mm (126.0 in) of Y, 2,700 mm (106.3 in) between columns, a 20,000 kg (44,092 lb) load and a weight of 49,000 kg (108,025 lb). Both have 6,000 mm of X, a 10,000 mm/min X rapid and a cutting feed of 1 ~ 5,000 mm/min.
BT50 (ISO50), with DIN69871-A as an option. The motor is 22 / 26 kW (30 / 35 HP) and the listed speed is 6,000 rpm, with direct drive spindles of 8,000 / 10,000 rpm as options.
