The AWEA LP-6033 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 6000 x 3300 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6033: 6,000 x 3,300 mm bridge type machining center with 3,500 mm between columns, 20,000 kg table load and 57,000 kg machine weight.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,300 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Table / Platter / Chuck Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 57,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,300 mm (129.9 in) (4,000 mm Opt.) |
| Z Axis Travel | 760 mm (29.9 in) (1,000 / 1,200 / 1,400 mm Opt.) |
| Table Size | 6,020 x 2,400 mm (237.0 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose To Table | 240 ~ 1,000 mm (9.4 ~ 39.4 in) (200 ~ 1,200 mm / 200 ~ 1,400 mm / 200 ~ 1,600 mm Opt.) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 6,000 rpm (Std.) Z-axis : 1,000 / 1,200 / 1,400 mm ; Gear 4,000 / 5,000 rpm (Opt.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 15,000 mm/min (591 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 750 liter (1.5 HP) |
| Machine Weight | 57,000 kg (125,661 lb) |
The price estimate for the AWEA LP-6033 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-6033#price; the request is passed to AWEA or an authorised dealer.
20,000 kg (44,092 lb) on a 6,020 x 2,400 mm (237.0 x 94.5 in) table. The LP-5033 is rated for 18,000 kg (39,683 lb); the LP-7033 and the LP-6025 match the LP-6033. AWEA supports the table on a one-piece base with 4 guide ways to avoid overhang at the ends of the travel.
The table gives P ≤ 0.050 mm and Ps ≤ 0.035 mm (VDI) for the LP-6033, and P = 0.040 mm and Ps = 0.030 mm for the LP-7033. The LP-6033 page does not explain the difference, so it should be raised with AWEA before ordering if full-travel positioning is critical.
The LP-6033 weighs 57,000 kg (125,661 lb); the LP-6025 weighs 50,000 kg (110,229 lb). Table size and table load are the same on both. The extra weight belongs to the wider bridge: 3,500 mm (137.8 in) between columns against 2,700 mm (106.3 in) on the LP-6025.
By a ball screw placed in the centre of the axis. AWEA calls this a wide span symmetrical center-driven design and says it avoids yawing and uneven guide way wear. A ball screw vibration absorber is fitted to reduce the vibration of the long screw. X and Y run on roller type linear guide ways.
