The AWEA LP-6033YZF is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 6000 x 3900 x 1000 mm, a top spindle speed of 4,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA LP-6033YZF: 6,000 x 3,900 x 1,000 mm 5-face bridge machine, 20,000 kg table load, 55,000 kg weight, 4,000 rpm BT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 6,000 mm |
| Y-Axis Travel | 3,900 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 4,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 (ISO50) / DIN69871-A (Opt.) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 55,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 6,000 mm (236.2 in) |
| Y Axis Travel | 3,900 mm (153.5 in) |
| Z Axis Travel | 1,000 mm (39.4 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Spindle Nose To Table | 200 ~ 1,200 mm (7.9 ~ 47.2 in) |
| Distance Between Columns | 3,500 mm (137.8 in) |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Max Spindle Speed | 4,000 rpm (Std.) Built-in 6,000 / 8,000 rpm (Opt.) Direct Drive 8,000 / 10,000 rpm (Opt.) |
| Spindle Taper | BT50 (ISO50) / DIN69871-A (Opt.) |
| Rapid Traverse X | 10,000 mm/min (394 ipm) |
| Rapid Traverse Y | 15,000 mm/min (591 ipm) |
| Rapid Traverse Z | 10,000 mm/min (394 ipm) |
| Cutting Feed Rate | 1 ~ 5,000 mm/min (0.04 ~ 197 ipm) |
| Tool Capacity | 32 (60 / 90 / 120 Opt.) |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Vdi 3441 | P ≤ 0.050 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.035 mm |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Hydraulic Tank Capacity | 120 liter (10 HP) |
| Lubrication Tank Capacity | 6 liter |
| Coolant Tank Capacity | 1,000 liter (1.5 HP) |
| Machine Weight | 55,000 kg (121,252 lb) |
The price estimate for the AWEA LP-6033YZF is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-lp-6033yzf#price; the request is passed to AWEA or an authorised dealer.
The table gives P ≤ 0.050 mm for the LP-6033YZF and P = 0.040 mm for the LP-7033YZF, with repeatability Ps ≤ 0.035 mm against Ps = 0.030 mm. AWEA's footnote explains the difference: from 7,000 mm of X travel upward an X-axis linear scale is a standard accessory. The 6,000 mm machine's figures are stated without that scale.
The machine is listed at 55,000 kg (121,252 lb) and the table is rated for 20,000 kg (44,092 lb) of workpiece and fixture. Add the 1,000 liter of coolant and the 120 liter of hydraulic oil. AWEA's spec table gives no floor plan dimensions for this model, so the layout drawing has to come from the maker.
The LP-6033YF has 760 mm (29.9 in) of Z, a 6,000 rpm spindle and weighs 52,000 kg (114,638 lb). The LP-6033YZF has 1,000 mm (39.4 in) of Z, a 4,000 rpm gear spindle as standard and weighs 55,000 kg (121,252 lb). Table load is 20,000 kg (44,092 lb) on both. Part height and the torque needed for roughing decide it.
X and Y use roller type linear guide ways. The two Y-axis ways are offset from each other, which AWEA says stiffens the cross beam and brings the spindle closer to it. Z is a hardened and ground box way; roller type linear guide ways on Z are an option tied to the direct drive spindle.
