The AWEA MCP-10060 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 10000 x 6400 x 1400 mm, a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-10060: 10,000 x 6,400 mm moving column multi-face machining center, BBT50 gear or built-in spindle, 22 / 26 kW, Z 1,400 mm (1,600 opt.).
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 10,000 mm |
| Y-Axis Travel | 6,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 10,000 mm (393.7 in) |
| Y Axis Travel | 6,400 mm (252.0 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 10,000 x 4,800 mm (393.7 x 189.0 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 5,700 mm (5,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 10 / 10 m/min (394 / 394 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 5,400 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
The price estimate for the AWEA MCP-10060 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mcp-10060#price; the request is passed to AWEA or an authorised dealer.
AWEA prints the row as "4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.)". So the standard machine has a gear spindle, two faster gear spindles are optional and two built-in spindles are optional. The motor is listed at 22 / 26 kW (29.5 / 34.9 hp) and the taper is BBT50.
It depends on part height. Standard Z is 1,400 mm (55.1 in) with the spindle nose 800 ~ 2,200 mm (31.5 ~ 86.6 in) from the table. The option changes that range to 600 ~ 2,200 mm. The top stays the same; the gain is at the bottom, which helps on low plates and shallow frames that would otherwise need raising blocks.
Up to 400 mm (15.7 in) and 20 kg (44 lb). Diameter is limited to Ø125 mm (Ø4.9 in), or Ø200 mm (Ø7.9 in) when the adjacent pockets are empty. The magazine holds 40T as standard and 60T as an option.
The maker's answer is the saddle. AWEA says the headstock sits in a U-shaped saddle with reinforced front structures that fully surrounds it, and that four linear guide ways and ten sliding blocks add rigidity. It claims the design reduces distortion even when the headstock is fully extended. The specification table itself gives no deflection or accuracy figure for this model.
Yes, two. The MCP-10050 has 10,000 mm (393.7 in) of X with 5,400 mm (212.6 in) of Y and a 10,000 x 3,800 mm (393.7 x 149.6 in) table. The MCP-10040 has 4,400 mm (173.2 in) of Y and a 10,000 x 2,800 mm (393.7 x 110.2 in) table. Both list the same spindle row as this machine.
