The AWEA MCP-14050 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 14000 x 5400 x 1400 mm, a top spindle speed of 0 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MCP-14050 5-face moving column bridge mill: 14,000 mm X, 5,400 mm Y, 1,400 mm Z, spindle nose 800 ~ 2,200 mm above table, BBT50, 22 / 26 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 14,000 mm |
| Y-Axis Travel | 5,400 mm |
| Z-Axis Travel | 1,400 mm |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 |
| Table / Platter / Chuck Size | 14,000 x 3,800 mm (551.2 x 149.6 in) |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 14,000 mm (551.2 in) |
| Y Axis Travel | 5,400 mm (212.6 in) |
| Z Axis Travel | 1,400 mm (55.1 in) (1,600 mm Opt.) |
| Table Size | 14,000 x 3,800 mm (551.2 x 149.6 in) |
| Distance Spindle Nose To Table | 800 ~ 2,200 mm (31.5 ~ 86.6 in) (600 ~ 2,200 mm Opt.) |
| Distance Between Columns With X Axis Covers | 4,700 mm (4,500 mm) |
| Spindle Taper | BBT50 |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Spindle Speed Vertical | 4,000 Gear Spindle (Std.)；5,000 / 6,000 Gear Spindle (Opt.)；8,000 / 12,000 Built-in Spindle (Opt.) |
| Rapid Traverse Xyz | 10 / 7.5 / 10 m/min (394 / 295 / 394 ipm) |
| Cutting Feed Rate | 1 ~ 10 m/min (39 ~ 394 ipm) |
| Tool Capacity | 40T (60T Opt.) |
| Max Tool Diameter | Ø125 / Ø200 mm (Ø4.9 / Ø7.9 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Coolant Tank Capacity | 4,000 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 100 liter |
| Air Pressure Requirement | 5 ~ 8 (5) kg/cm² |
| Power Requirement | 220 ± 10 % Vac / 80 kVA |
The price estimate for the AWEA MCP-14050 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mcp-14050#price; the request is passed to AWEA or an authorised dealer.
The MCP-14050. It has 1,400 mm (55.1 in) of Z travel and a spindle nose range of 800 ~ 2,200 mm (31.5 ~ 86.6 in). The LG-14050 has 1,000 mm (39.4 in) of Z and a range of 200 ~ 1,200 mm (7.9 ~ 47.2 in), which suits flatter work. Both have 14,000 mm (551.2 in) of X travel and a 22 / 26 kW spindle motor.
AWEA describes a headstock that sits in a U-shaped saddle with reinforced front structures, fully surrounding it, with four linear guide ways and ten sliding blocks. The maker states that the rigidity of the head structure has been increased by 40% and that distortion is reduced even at full extension.
The table lists a gear spindle as standard at 4,000, optional gear spindles at 5,000 / 6,000 and optional built-in spindles at 8,000 / 12,000. AWEA prints these speeds without a unit. All use BBT50 and the motor is given as 22 / 26 kW (29.5 / 34.9 hp).
Yes. AWEA lists 1,600 mm as an optional Z stroke in place of the standard 1,400 mm (55.1 in). With it the distance from spindle nose to table top becomes 600 ~ 2,200 mm, so the extra travel is gained at the bottom of the range, closer to the table.
