The AWEA MEGA5 P3032 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 3000 x 3200 x 1000 mm, a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MEGA5 P3032: 3,000 x 3,200 x 1,000 mm bridge 5-axis machine, HSK-A100 12,000 rpm high torque head, 3,020 x 2,400 mm table, 12,000 kg load.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A100 |
| Table / Platter / Chuck Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load Capacity | 12,000 kg |
| Automatic Tool Changer (ATC) | 40 Tool Stations |
| Approx. Machine Weight | 46,500 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (opt. 1,200 mm) |
| Table Size | 3,020 x 2,400 mm (118.9 x 94.5 in) |
| Max Table Load | 12,000 kg (26,455 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | TCH-30F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) TCH-20F = 200 ~ 1,200 mm (opt. 200 ~ 1,400 mm) |
| Distance 90 Deg Spindle Center To Table | TCH-30F = 550 ~ 1,550 mm (opt. 550 ~ 1,750 mm) TCH-20F = 510 ~ 1,510 mm (opt. 510 ~ 1,710 mm) |
| T Slots | 28 x 200 mm |
| Spindle Taper | HSK-A100 |
| Spindle Power S1 S6 40 | 40 / 50 kW (53.6 / 67.1 hp) |
| Max Spindle Speed | 12,000 rpm |
| Rapid Traverse X | 20 m / min |
| Rapid Traverse Y | 12 m / min |
| Rapid Traverse Z | 10 m / min |
| Cutting Feed Rate | 10 m / min |
| Tool Capacity | 40 T |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Max Tool Diameter | Ø140 / Ø180 mm (Ø5.5 / Ø7.1 in) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.025 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps = 0.018 mm |
| Coolant Tank Capacity | 750 liter |
| Lubrication Tank Capacity | 6 liter |
| Hydraulic Tank Capacity | 150 liter |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Machine Weight | 46,500 kg (102,513 lb) |
| Max Workpiece Length | 3,000 mm (118.1 in) |
| Max Workpiece Width | 2,400 mm (94.5 in) |
| Max Workpiece Height | 850 mm (33.5 in) |
The price estimate for the AWEA MEGA5 P3032 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mega5-p3032#price; the request is passed to AWEA or an authorised dealer.
AWEA's table lists clearances for both heads on this frame. The spindle nose to table distance is the same, 200 ~ 1,200 mm. With the spindle horizontal, the centre line is 550 ~ 1,550 mm above the table with the TCH-30F and 510 ~ 1,510 mm with the TCH-20F. The TCH-20F series has a 55 kW motor and runs up to 24,000 rpm. Spindle taper, power and speed in the table are those of the TCH-30F.
AWEA states a maximum of 314 Nm at 1,540 rpm for the TCH-30F. The motor is rated 40 / 50 kW (53.6 / 67.1 hp) and is built into the spindle, and top speed is 12,000 rpm. For angled cuts under load, a hydraulic clamping system locks the B and C axes.
Standard Z travel is 1,000 mm (39.4 in), with 1,200 mm listed as an option. The option raises the upper limit of the spindle nose from 200 ~ 1,200 mm to 200 ~ 1,400 mm above the table. AWEA's maximum workpiece height in the table is 850 mm (33.5 in).
The table is 2,400 mm (94.5 in) wide and rated for 12,000 kg (26,455 lb). AWEA supports it on four compound guide ways and extends the bed travel range so the table has no overhang, which the maker says keeps support and rigidity constant along the stroke. The X ball screw sits in the centre of the table.
Up to 15 kg (33 lb) and 350 mm (13.8 in) long. Diameter may be Ø140 mm (Ø5.5 in) with neighbouring pockets filled, or Ø180 mm (Ø7.1 in) with them empty. The magazine has 40 positions.
