The AWEA MVP-5032 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 5000 x 3200 x 1000 mm, a top spindle speed of 10 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MVP-5032: 5,000 x 3,200 mm five-face bridge machining center, 18,000 kg table load, 1,250 mm W axis, BT 50 spindle, 22 / 26 kW, 60 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 5,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 10 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load Capacity | 18,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 75,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 5,000 mm (196.9 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 5,020 x 2,400 mm (197.6 x 94.5 in) |
| Max Table Load | 18,000 kg (39,683 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | 200 ~ 2,450 mm (7.87" ~ 96.45") |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Tool Capacity | 60 T |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.030 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | P = 0.022 mm |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 750 L |
| Machine Weight | 75,000 kg (165,344 lb) |
The price estimate for the AWEA MVP-5032 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mvp-5032#price; the request is passed to AWEA or an authorised dealer.
18,000 kg (39,683 lb) on a table of 5,020 x 2,400 mm (197.6 x 94.5 in). The MVP-4032 is listed at 15,000 kg (33,069 lb), and the MVP-6032, MVP-7032 and MVP-8032 at 20,000 kg (44,092 lb). AWEA states the working table is fully supported by 4 guide-way rails, two of them linear guide ways and two box ways.
Only in X rapid traverse: 10 m/min (394 ipm) against the 15 m/min (591 ipm) of the MVP-4032. Y at 12 m/min (472 ipm), Z at 10 m/min (394 ipm), W at 3 m/min (118 ipm) and the 5 m/min (197 ipm) cutting feed rate are the same on both machines.
The table lists a 60 T magazine with a maximum tool diameter of Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in), a maximum length of 400 mm (15.7 in) and a maximum weight of 20 kg (44 lb). The taper is BT 50. Tools are exchanged for the vertical or the horizontal spindle at any W-axis position.
AWEA names the FANUC Oi-MD as the standard CNC control and says other controllers are also available. A Five Sided Coordinate Conversion System is listed as standard, which is the function that carries work coordinates from the top face to the side faces.
