The AWEA MVP-7032 is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. It offers working travels of 7000 x 3200 x 1000 mm, a top spindle speed of 10 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA MVP-7032: five-face bridge machining center with 7,000 mm X travel, 7,020 x 2,400 mm table, 20,000 kg load, BT 50 gear spindle, 26 kW.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| X-Axis Travel | 7,000 mm |
| Y-Axis Travel | 3,200 mm |
| Z-Axis Travel | 1,000 mm |
| Maximum Spindle Speed | 10 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT 50 |
| Table / Platter / Chuck Size | 7,020 x 2,400 mm (276.4 x 94.5 in) |
| Max Table Load Capacity | 20,000 kg |
| Automatic Tool Changer (ATC) | 60 Tool Stations |
| Approx. Machine Weight | 85,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 7,000 mm (275.6 in) |
| Y Axis Travel | 3,200 mm (126.0 in) |
| Z Axis Travel | 1,000 mm (39.4 in) (Opt. 1,200 / 1,400 mm) |
| W Axis Travel | 1,250 mm (49.2 in) |
| Table Size | 7,020 x 2,400 mm (276.4 x 94.5 in) |
| Max Table Load | 20,000 kg (44,092 lb) |
| Distance Between Columns | 2,700 mm (106.3 in) |
| Distance Spindle Nose To Table | 200 ~ 2,450 mm (7.87" ~ 96.45") |
| Max Spindle Speed | V : 10 ~ 4,000 rpm ; H : 20 ~ 3,000 rpm |
| Spindle Motor Power | 22 / 26 kW (30 / 35 HP) |
| Spindle Taper | BT 50 |
| Rapid Traverse X | 7.5 m/min (295 ipm) |
| Rapid Traverse Y | 12 m/min (472 ipm) |
| Rapid Traverse Z | 10 m/min (394 ipm) |
| Rapid Traverse W | 3 m/min (118 ipm) |
| Cutting Feed Rate | 5 m/min (197 ipm) |
| Tool Capacity | 60 T |
| Max Tool Diameter | Ø127 / Ø215 mm (Ø5.0 / Ø8.5 in) |
| Max Tool Length | 400 mm (15.7 in) |
| Max Tool Weight | 20 kg (44 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P = 0.040 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | P = 0.030 mm |
| Power Requirement | AC 220 + 10% 3 phase / 80 KVA |
| Air Pressure Requirement | 5 ~ 8 kg/cm² |
| Hydraulic Tank Capacity | 290 L |
| Lubrication Tank Capacity | 6 L |
| Coolant Tank Capacity | 750 L |
| Machine Weight | 85,000 kg (187,390 lb) |
The price estimate for the AWEA MVP-7032 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-mvp-7032#price; the request is passed to AWEA or an authorised dealer.
Under VDI the listed positioning accuracy widens with X travel: P = 0.025 mm on the MVP-4032, P = 0.030 mm on the MVP-5032, P = 0.035 mm on the MVP-6032 and P = 0.040 mm on the MVP-7032, each over full travel. The JIS figure is printed as ± 0.010 mm over full travel for all of them.
The vertical spindle and the horizontal spindle head are standard; the horizontal head indexes on a curvic coupling in 5° increments (72 positions) and is oil mist lubricated. AWEA lists three optional heads: an extension head, a 35° angular head and a universal head. The maker's page also mentions automatic exchange of optional heads.
Yes. AWEA says the standard 4,000 rpm 2-step gear transmission can optionally be replaced with either a direct drive spindle or a built-in spindle, and that coolant through spindle is also available. The spec table on this page describes the standard build: 10 ~ 4,000 rpm vertical, 22 / 26 kW (30 / 35 HP), BT 50.
Y travel is 3,200 mm (126.0 in), the table is 2,400 mm (94.5 in) wide and the columns are 2,700 mm (106.3 in) apart. For wider work the MVP-7040 has 4,000 mm (157.5 in) of Y travel and 3,500 mm (137.8 in) between columns, with the same 7,000 mm (275.6 in) X travel.
