The AWEA VP-2012HS is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 2000 x 1200 x 760 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-2012HS: 2,000 x 1,200 x 760 mm bridge machining center, 10,000 rpm direct-driven BBT50 spindle, 24 m/min rapids, 3,500 kg table.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 2,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (Opt. BBT40) |
| Table / Platter / Chuck Size | 2,000 x 1,100 mm (78.7 x 43.3 in) |
| Max Table Load Capacity | 3,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 16,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 2,000 mm (78.7 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 2,000 x 1,100 mm (78.7 x 43.3 in) |
| Max Table Load | 3,500 kg (7,716 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Taper | BBT50 (Opt. BBT40) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct-driven spindle 10,000 rpm |
| Rapid Traverse X | 24 m/min (945 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 12 m/min (472 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.02 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Power Requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Lubrication Tank Capacity | 4.5 liter |
| Hydraulic Tank Capacity | 400 liter (1 HP) |
| Machine Weight | 16,000 kg (35,273 lb) |
The price estimate for the AWEA VP-2012HS is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-vp-2012hs#price; the request is passed to AWEA or an authorised dealer.
The HD-2012, whose gear spindle tops out at 6,000 rpm, whose Z runs on box ways and whose table takes 4,500 kg (9,921 lb). The VP-2012HS is built for speed instead: a direct-driven 10,000 rpm spindle, roller type linear guide ways on all three axes and a 3,500 kg (7,716 lb) table. Both machines list a 22 / 26 kW (29.5 / 34.9 hp) spindle motor.
Taper and speed. The VP-2012HS uses BBT50 at 10,000 rpm and accepts tools up to 15 kg (33 lb). The VP-2012HSS uses BT 40 at up to 15,000 rpm, limits tools to 7 kg (15 lb) and lists positioning of ± 0.004 mm (± 0.0002") over full travel. Travels on X and Y are identical.
AWEA prints two sets of figures. In the JIS rows, positioning is ± 0.010 mm over full travel and repeatability is ± 0.003 mm. In the VDI rows, positioning is P ≤ 0.02 mm over full travel and repeatability is Ps ≤ 0.015 mm. The two standards measure differently, so compare like with like when reading another machine's sheet.
No. According to AWEA, the servo motor and strengthened ball screw make a counter balance system unnecessary on Z, and the maker credits that layout with better dynamic response. Z travel is 760 mm (29.9 in) at a rapid of 20 m/min (787 ipm).
Yes, as an option. BBT50 is the taper in the specification table, with BBT40 marked Opt. AWEA's spindle description for the series gives direct-driven speeds of 8,000 ~ 15,000 rpm and built-in motorized speeds of 12,000 ~ 20,000 rpm, so the taper and the speed are chosen together when ordering.