The AWEA VP-3012HS is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 3000 x 1200 x 760 mm, a top spindle speed of 10,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-3012HS: 3,000 x 1,200 x 760 mm high speed bridge mill, 10,000 rpm BBT50 direct-driven spindle, 4,500 kg table, 20 m/min X rapid.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 10,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BBT50 (Opt. BBT40) |
| Table / Platter / Chuck Size | 3,000 x 1,100 mm (118.1 x 43.3 in) |
| Max Table Load Capacity | 4,500 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 20,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,000 x 1,100 mm (118.1 x 43.3 in) |
| Max Table Load | 4,500 kg (9,921 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 mm (7.9 ~ 37.8 in) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Taper | BBT50 (Opt. BBT40) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Direct-driven spindle 10,000 rpm |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 12 m/min (472 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy Jis B 6338 | ± 0.010 mm / Full Travel |
| Positioning Accuracy Vdi 3441 | P ≤ 0.02 mm / Full Travel |
| Repeatability Jis B 6338 | ± 0.003 mm |
| Repeatability Vdi 3441 | Ps ≤ 0.015 mm |
| Power Requirement | AC 220 ± 10 % 3 , 60 / 50 Hz / 40 kVA |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Lubrication Tank Capacity | 4.5 liter |
| Hydraulic Tank Capacity | 400 liter (1 HP) |
| Machine Weight | 20,000 kg (44,092 lb) |
The price estimate for the AWEA VP-3012HS is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-vp-3012hs#price; the request is passed to AWEA or an authorised dealer.
Not according to the published rows. Both machines list VDI positioning of P ≤ 0.02 mm over full travel and repeatability of Ps ≤ 0.015 mm, and both list ± 0.010 mm and ± 0.003 mm by the JIS method. The difference between them is the X rapid: 20 m/min (787 ipm) here against 24 m/min (945 ipm) on the VP-2012HS.
4,500 kg (9,921 lb) across a 3,000 x 1,100 mm (118.1 x 43.3 in) surface. If the job weighs more, the HD-3012 is rated at 5,500 kg (12,125 lb) on the same table size, though it runs a gear spindle at 6,000 rpm instead of this machine's 10,000 rpm.
AWEA says an optional long nose spindle, combined with a shorter tool, increases rigidity and accuracy, and recommends it for groove milling and boring. The idea is to reach into a pocket with the spindle housing itself, so the cutter can be kept short. It is an option and should be confirmed at order.
Distance from spindle nose to table runs 200 ~ 960 mm (7.9 ~ 37.8 in), and Z travel is 760 mm (29.9 in). Tool length comes off that daylight, and the magazine accepts tools up to 350 mm (13.8 in). Between the columns there is 1,300 mm (51.2 in) of width for the workpiece to pass.
Roller type linear guide ways on X, Y and Z, per AWEA's description of the series. The Y-axis ways are arranged in a stepped offset, which the maker says raises structural integrity and brings the spindle center closer to the cross beam.
