The AWEA VP-3016 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 3000 x 1600 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-3016: 3,000 x 1,600 x 760 mm bridge-type VMC, 3,000 x 1,500 mm table, 7,000 kg load, 22 / 26 kW gear spindle at 6,000 rpm.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 3,000 mm |
| Y-Axis Travel | 1,600 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 22.0 kW |
| Spindle Taper Interface | BT50 / BBT50 (Opt.) |
| Table / Platter / Chuck Size | 3,000 x 1,500 mm (118.1 x 59.1 in) |
| Max Table Load Capacity | 7,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 24,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 3,000 mm (118.1 in) |
| Y Axis Travel | 1,600 mm (63.0 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 3,000 x 1,500 mm (118.1 x 59.1 in) |
| Max Table Load | 7,000 kg (15,432 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 (#50 gear spindle) |
| Distance Between Columns | 1,800 mm (70.9 in) |
| Spindle Motor Power | 22 / 26 kW (29.5 / 34.9 hp) |
| Max Spindle Speed | Gear Spindle 6,000 rpm |
| Spindle Taper | BT50 / BBT50 (Opt.) |
| Rapid Traverse X | 20 m/min (787 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 12 m/min (472 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy X | A ≤ 0.016 mm |
| Positioning Accuracy Yz | A ≤ 0.012 mm |
| Repeatability X | R ≤ 0.012 mm |
| Repeatability Yz | R ≤ 0.010 mm |
| Coolant Tank Capacity | 465 liter (1.5 HP) |
| Lubrication Tank Capacity | 4.6 liter |
| Hydraulic Tank Capacity | 120 liter (7.5 HP) |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Power Requirement | AC 220 ± 10 % 3 phase , 60 / 50 Hz / 40 kVA |
| Machine Weight | 24,000 kg (52,910 lb) |
The price estimate for the AWEA VP-3016 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-vp-3016#price; the request is passed to AWEA or an authorised dealer.
X is 3,000 mm (118.1 in), Y is 1,600 mm (63.0 in) and Z is 760 mm (29.9 in). The table is 3,000 x 1,500 mm (118.1 x 59.1 in), rated for 7,000 kg (15,432 lb), with 1,800 mm (70.9 in) between the columns.
Same X stroke and same X rapid, different width and power. The VP-3012 has 1,200 mm (47.2 in) of Y, a table load of 4,500 kg (9,921 lb), an 11 / 15 kW (14.8 / 20.1 hp) motor and weighs 20,000 kg (44,092 lb). The VP-3016 has 1,600 mm (63.0 in) of Y, 7,000 kg (15,432 lb), 22 / 26 kW (29.5 / 34.9 hp) and 24,000 kg (52,910 lb).
When the part is heavier than the VP-3016 allows. The SP-3016 is rated for 10,000 kg (22,046 lb) on a 3,260 x 1,500 mm (128.3 x 59.1 in) table with 3,060 mm (120.5 in) of X. The columns of the SP-3016 are 1,700 mm (66.9 in) apart, slightly less than the 1,800 mm (70.9 in) here.
AWEA describes Y-axis linear guide ways that are offset from each other, which shortens the distance from spindle to cross beam, and a head in which spindle, motor, ball screw and hydraulic counterbalance cylinders are arranged symmetrically. The Z axis runs on a hardened and ground box way.
A foundation for 24,000 kg (52,910 lb) of machine plus the table load, a three-phase supply of 40 kVA, and air at 5 ~ 7 kg/cm². Fluids to fill include 465 liter of coolant, 120 liter of hydraulic oil and 4.6 liter of lubricant.
