The AWEA VP-4012 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. It offers working travels of 4000 x 1200 x 760 mm, a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
AWEA VP-4012: 4,000 x 1,200 x 760 mm bridge-type machining center, 6,000 kg table load, 10 m/min X rapid, 6,000 rpm BT50 gear spindle.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | AWEA (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 4,000 mm |
| Y-Axis Travel | 1,200 mm |
| Z-Axis Travel | 760 mm |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | BT50 / BBT50 (Opt.) |
| Table / Platter / Chuck Size | 4,000 x 1,100 mm (157.5 x 43.3 in) |
| Max Table Load Capacity | 6,000 kg |
| Automatic Tool Changer (ATC) | 32 Tool Stations |
| Approx. Machine Weight | 24,000 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Axis Travel | 4,000 mm (157.5 in) |
| Y Axis Travel | 1,200 mm (47.2 in) |
| Z Axis Travel | 760 mm (29.9 in) |
| Table Size | 4,000 x 1,100 mm (157.5 x 43.3 in) |
| Max Table Load | 6,000 kg (13,228 lb) |
| Distance Spindle Nose To Table | 200 ~ 960 (#50 gear spindle) |
| Distance Between Columns | 1,300 mm (51.2 in) |
| Spindle Motor Power | 11 / 15 kW (14.8 / 20.1 hp) |
| Max Spindle Speed | Gear Spindle 6,000 rpm |
| Spindle Taper | BT50 / BBT50 (Opt.) |
| Rapid Traverse X | 10 m/min (394 ipm) |
| Rapid Traverse Y | 24 m/min (945 ipm) |
| Rapid Traverse Z | 20 m/min (787 ipm) |
| Cutting Feed Rate | 10 m/min (394 ipm) |
| Tool Capacity | 32 T (Opt. 24 / 40 T) |
| Max Tool Diameter | Ø125 / Ø229 mm (Ø4.9 / Ø9.0 in) |
| Max Tool Length | 350 mm (13.8 in) |
| Max Tool Weight | 15 kg (33 lb) |
| Positioning Accuracy X | A ≤ 0.02 mm |
| Positioning Accuracy Yz | A ≤ 0.012 mm |
| Repeatability X | R ≤ 0.014 mm |
| Repeatability Yz | R ≤ 0.010 mm |
| Coolant Tank Capacity | 465 liter (1.5 HP) |
| Lubrication Tank Capacity | 4.6 liter |
| Hydraulic Tank Capacity | 8 liter (2 HP) |
| Air Pressure Requirement | 5 ~ 7 kg/cm² |
| Power Requirement | AC 220 ± 10 % 3 phase , 60 / 50 Hz / 40 kVA |
| Machine Weight | 24,000 kg (52,910 lb) |
The price estimate for the AWEA VP-4012 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/awea-vp-4012#price; the request is passed to AWEA or an authorised dealer.
AWEA's table simply lists it that way: 10 m/min (394 ipm) for the VP-4012 against 20 m/min (787 ipm) for the VP-3012. The maker gives no reason on the page. What a buyer can take from it is that long X moves on this machine run at feed speed, so cycle estimates should count repositioning time.
6,000 kg (13,228 lb), spread over a 4,000 x 1,100 mm (157.5 x 43.3 in) surface. The VP-5012 goes to 8,000 kg (17,637 lb). The table is described by AWEA as rib reinforced.
Inside the VP series there is none at this length: the 1,600 mm (63.0 in) Y models end with the VP-3016. The SP-4016 pairs 4,000 mm (157.5 in) of X with 1,600 mm of Y, a 4,200 x 1,500 mm (165.4 x 59.1 in) table and a 12,000 kg (26,455 lb) load rating.
Yes. It is listed with 32 tools, optionally 24 or 40, and the same limits: Ø125 mm (Ø4.9 in), or Ø229 mm (Ø9.0 in) next to empty pockets, 350 mm (13.8 in) in length and 15 kg (33 lb) per tool.
The VP-4012HS has the same travels, table load and 24,000 kg (52,910 lb) weight with a direct-driven spindle at 10,000 rpm and 22 / 26 kW (29.5 / 34.9 hp). Its X rapid is also 10 m/min (394 ipm), so the change is in the spindle, not in axis speed.
