The Brother TC-31A is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Brother NC-A00. It offers working travels of 500 x 300 x 250 mm, a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Brother TC-31A tapping center with two-face pallet table: listed 500 x 300 x 250 mm travels, 8,000 rpm 3.7 kW BT30 spindle, 3.0 s index.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Brother (Japan) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Brother NC-A00 |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| X-Axis Travel | 500 mm |
| Y-Axis Travel | 300 mm |
| Z-Axis Travel | 250 mm |
| Spindle Taper Interface | BT30 |
| Table / Platter / Chuck Size | 500 x 300 mm (19.7 x 11.8 in) per face |
| Approx. Machine Weight | 1,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Table Type | Two-face rotary pallet table |
| Table Size | 500 x 300 mm (19.7 x 11.8 in) per face |
| X Axis Travel | 500 mm (19.7 in) |
| Y Axis Travel | 300 mm (11.8 in) |
| Z Axis Travel | 250 mm (9.8 in) |
| Spindle Speed | 8,000 rpm |
| Spindle Motor | 3.7 kW (5 hp) |
| Spindle Taper | BT30 |
| Tool Magazine | 21-position ATC |
| Rapid Traverse | 30 m/min (1,181 ipm) all axes |
| Positioning Accuracy | +/- 0.005 mm |
| Repeatability | +/- 0.002 mm |
| Table Load Capacity | 80 kg per face (176 lb) |
| Pallet Index Time | 3.0 seconds |
| CNC Control | Brother NC-A00 |
| Machine Weight | 1,700 kg (3,748 lb) |
| Footprint | 1,400 x 1,800 mm (55 x 71 in) |
Our best estimate for the Brother TC-31A is $15,000 - $45,000 (used). This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Brother Industries; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/brother-tc-31a#price; the request is passed to Brother Industries or an authorised dealer.
It carries two 500 x 300 mm (19.7 x 11.8 in) faces. One is inside the machine being cut while the operator works on the other, and the table indexes between them in a listed 3.0 seconds. The spindle therefore does not wait while parts are changed, which is where most time goes on short tapping cycles.
The listed limit is 80 kg per face (176 lb). Count the fixture, the clamps and the part together, and keep the two faces close in weight, as both are carried on the same rotary table.
Only by name as far as the figures go. The TC-31B has 350 mm (13.8 in) of X, 250 mm (9.8 in) of Y and 350 mm (13.8 in) of Z, a 12,000 rpm spindle and 26 tools (+1). The TC-31A listing gives 500 x 300 x 250 mm, 8,000 rpm, a 21-position ATC and the pallet table.
The listed spindle is BT30, 8,000 rpm, driven by a 3.7 kW (5 hp) motor. That suits drilling, tapping and light milling. These figures are not confirmed against Brother, so check the nameplate and run the spindle up to speed before buying.