The CHIRON FZ 08 FX is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 42,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron FZ 08 FX small-part 5-axis machining center: listed with a 42,000 rpm HSK-E32 spindle, ø 200 mm table, ø 80 mm workpieces and 30 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 42,000 RPM |
| Spindle Taper Interface | HSK-E32 |
| Table / Platter / Chuck Size | ø 200 mm |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X Y Z Travel | 320 mm / 280 mm / 350 mm |
| Table Size | ø 200 mm |
| Max Workpiece Diameter | ø 80 mm |
| Max Workpiece Height | 100 mm |
| Max Spindle Speed | 42,000 rpm |
| Spindle Taper | HSK-E32 |
| Feed Rate Max | 60 m/min |
| A Axis Range | +30° / -110° |
| C Axis Range | 360° (continuous) |
| Tool Magazine Capacity | 30 tools |
| Machine Footprint | 1,500 mm × 1,900 mm |
| Power | 87.2 hp |
Our best estimate for the Chiron FZ 08 FX is $280,000 - $380,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Chiron; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/chiron-fz-08-fx#price; the request is passed to Chiron or an authorised dealer.
The listed figures give a maximum workpiece diameter of ø 80 mm and a maximum height of 100 mm, on a ø 200 mm table. Travels are listed as 320 mm / 280 mm / 350 mm, much larger than the part, to allow for the rotary axes and tool access.
A 42,000 rpm spindle with an HSK-E32 taper. No torque is listed. A power row shows 87.2 hp but does not state whether it refers to the spindle or to the whole machine, so treat it as unclear until it is confirmed.
The A-axis is listed at +30° / -110° and the C-axis at 360° continuous. That lets the tool reach the sides of a small part and beyond horizontal on one side in a single clamping.
The FZ 08 S Five Axis lists 450 mm of X, 270 mm of Y and 310 mm of Z, 15,000 to 40,000 rpm with 9 to 23 Nm, HSK-A40 or HSK-E40 and 24 to 80 tools. The FZ 08 FX is listed with a smaller HSK-E32 taper, 42,000 rpm and a 30-tool magazine.
