The CHIRON FZ 12 S Five Axis is an industrial-grade 5-Axis Machining Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron FZ 12 S Five Axis single-spindle machining center: 550 x 400 x 400 mm travels, 12,000 to 30,000 rpm, 11 to 110 Nm, HSK-A40/A50/A63, 24 to 128 tools.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A40 / HSK-A50 / HSK-A63 |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Tool Changer | Chain magazine |
| X-Axis Travel | 550 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 400 mm |
| Chip To Chip Time | 2.7 s |
| Spindle Count | 1 |
| Max Spindle Speed | 12,000 – 30,000 rpm |
| Spindle Torque | 11 – 110 Nm |
| Spindle Taper | HSK-A40 / HSK-A50 / HSK-A63 |
| Tool Capacity | 24 – 128 |
| Max Tool Diameter | 85 mm |
| Max Tool Diameter Adjacent Empty | 125 mm |
| Max Tool Length | 250 mm |
| Max Tool Weight | 5.0 kg |
| Rapid Traverse | 75 – 75 – 75 m/min (X – Y – Z) |
| Axis Acceleration | 10 – 15 – 20 m/s² (X – Y – Z) |
Our best estimate for the Chiron FZ 12 S Five Axis is $350,000 - $500,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Chiron; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/chiron-fz-12-s-five-axis#price; the request is passed to Chiron or an authorised dealer.
Chiron lists maximum speeds from 12,000 to 30,000 rpm, torque from 11 to 110 Nm and three tapers: HSK-A40, HSK-A50 or HSK-A63. The table gives the ranges only, not the combinations, so the spindle of a particular machine has to be confirmed from its order data.
From 24 to 128 tools in a chain magazine, depending on the version. Each tool can be up to 85 mm in diameter, or 125 mm with adjacent pockets empty, up to 250 mm long and up to 5.0 kg. Tool change is 2.7 s chip to chip.
550 mm in X, 400 mm in Y and 400 mm in Z. Rapid traverse is 75 m/min in every axis. Acceleration is 10 m/s² in X, 15 m/s² in Y and 20 m/s² in Z.
The FZ 16S is the larger machine: 660 mm of X, 680 mm of Y and 500 mm of Z, with HSK-A63 only, 12,500 to 20,000 rpm, 86 to 208 Nm and 42 to 162 tools. The FZ 12 S Five Axis is smaller but reaches 30,000 rpm and offers the lighter HSK-A40 and HSK-A50 tapers as well.
Not in the headline figures. The FZ 12S lists the same 550 mm, 400 mm and 400 mm travels, 12,000 to 30,000 rpm, 11 to 110 Nm, the same three tapers and 24 to 128 tools. If the two differ, it is in equipment the table does not show.