The CHIRON FZ 12W is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron FZ 12W: single-spindle machining center, 550 x 400 x 400 mm travels, chain magazine for 24 to 128 tools, 2.7 s chip-to-chip, HSK-A40 to A63.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | HSK-A40 / HSK-A50 / HSK-A63 |
| Automatic Tool Changer (ATC) | 24 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Tool Changer | Chain magazine |
| X-Axis Travel | 550 mm |
| Y-Axis Travel | 400 mm |
| Z-Axis Travel | 400 mm |
| Chip To Chip Time | 2.7 s |
| Spindle Count | 1 |
| Max Spindle Speed | 12,000 – 30,000 rpm |
| Spindle Torque | 11 – 110 Nm |
| Spindle Taper | HSK-A40 / HSK-A50 / HSK-A63 |
| Tool Capacity | 24 – 128 |
| Max Tool Diameter | 85 mm |
| Max Tool Diameter Adjacent Empty | 125 mm |
| Max Tool Length | 250 mm |
| Max Tool Weight | 5.0 kg |
| Rapid Traverse | 75 – 75 – 75 m/min (X – Y – Z) |
| Axis Acceleration | 10 – 15 – 20 m/s² (X – Y – Z) |
Our best estimate for the Chiron FZ 12W is $300,000 - $400,000. This is an estimate for a vertical machining centers (vmc) in this class, not a quote from Chiron; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/chiron-fz-12w#price; the request is passed to Chiron or an authorised dealer.
From 24 to 128, depending on the chain magazine chosen. Chip-to-chip time is 2.7 s. With 128 tools on a machine of this size, several part numbers can stay tooled up at once, which cuts setup between batches.
85 mm in diameter with tools in the neighbouring pockets, 125 mm in diameter when the adjacent pockets are empty, 250 mm long and 5.0 kg. Compare the 250 mm length with the 400 mm Z travel when planning deep drilling on tall parts.
It depends on volume and on the cut. The DZ 12W machines two parts per cycle on the same travels but is limited to 15,000 to 24,000 rpm and 29 to 59 Nm, with 2 x 12 to 2 x 104 tools. The FZ 12W has one spindle, with options up to 30,000 rpm and up to 110 Nm.
HSK-A40, HSK-A50 or HSK-A63. Speeds range from 12,000 to 30,000 rpm and torque from 11 to 110 Nm across the options. Chiron's sheet does not say which interface carries which rating, so ask for the speed and torque of the exact spindle quoted.
On travels (550 × 400 × 400 mm), spindle range (12,000 to 30,000 rpm, 11 to 110 Nm), interfaces and tool capacity (24 to 128), the FZ 12S and the FZ 12 S Five Axis carry the same values as the FZ 12W. The differences lie outside those rows.