The CHIRON FZ 15S is an industrial-grade 5-Axis Machining Centers powered by the Siemens SINUMERIK 840D sl. a top spindle speed of 12,000 RPM, and a 5-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Chiron FZ 15S: compact 5-axis center, 730 x 400 x 425 mm travels, 280 mm rotary table, 12,000 - 20,000 rpm, 20 tools, 1.7 sec chip to chip.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | CHIRON (International) |
| Machine Type | 5-Axis Machining Centers |
| CNC Controller System | Siemens SINUMERIK 840D sl |
| Number of Controlled Axes | 5-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | SK-40 / HSK-A63 |
| Automatic Tool Changer (ATC) | 20 Tool Stations |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| X-Axis Travel | 730 mm (28.7 in) |
| Y-Axis Travel | 400 mm (15.7 in) |
| Z-Axis Travel | 425 mm (16.7 in) |
| Max Spindle Speed | 12,000 - 20,000 rpm |
| Spindle Taper | SK-40 / HSK-A63 |
| A Axis Range | Direct drive tilt axis |
| C Axis Range | 360° continuous direct drive |
| Max Workpiece Diameter | 350 mm (13.8 in) |
| Max Workpiece Weight | 150 kg (330 lb) |
| Table Diameter | 280 mm (11.0 in) rotary table |
| Tool Capacity | 20 tools |
| Machine Bed | Mineral cast |
| Machine Footprint | Approx. 2.5 m² floor area |
| CNC Control | Siemens SINUMERIK 840D sl |
| Thermal Management | Water-cooled drives on all axes and spindle |
| Tool Changer | Basket tool changer |
| Chip To Chip Time | 1.7 sec |
| Spindle Count | 1 |
| Spindle Torque Max | 90 - 180 Nm |
| Max Tool Diameter | 65 mm (2.56 in) |
| Max Tool Diameter Adjacent Empty | 175 mm (6.9 in) |
| Max Tool Length | ca. 220 mm (8.7 in) |
| Max Tool Weight | 2.5 kg (5.5 lb) |
| Rapid Traverse | X 75 m/min, Y 75 m/min, Z 75 m/min (2,953, 2,953, 2,953 ipm) |
| Axis Acceleration | X 10 m/s², Y 10 m/s², Z 10 m/s² |
Our best estimate for the Chiron FZ 15S is $300,000 - $450,000. This is an estimate for a 5-axis machining centers in this class, not a quote from Chiron; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/chiron-fz-15s#price; the request is passed to Chiron or an authorised dealer.
The 280 mm (11.0 in) rotary table carries workpieces up to 350 mm (13.8 in) in diameter and 150 kg (330 lb). Linear travels are 730 mm (28.7 in) in X, 400 mm (15.7 in) in Y and 425 mm (16.7 in) in Z. Tool length, up to about 220 mm (8.7 in), comes out of the Z travel available above the part.
Chiron lists SK-40 or HSK-A63, with maximum speeds of 12,000 - 20,000 rpm and maximum torque of 90 - 180 Nm depending on the spindle. The sheet does not state a power rating. One spindle is fitted; this is a single-spindle machine.
It holds 20 tools. Maximum tool diameter is 65 mm (2.56 in), or 175 mm (6.9 in) when the adjacent places are empty. Tool length is about 220 mm (8.7 in) and tool weight 2.5 kg (5.5 lb). Chip-to-chip time is 1.7 sec.
The FZ 15W has the same 730 mm (28.7 in) X and 400 mm (15.7 in) Y travel but adds an integrated 2-position pallet changer, rated at 150 kg (330 lb) per pallet position. The FZ 15W can also be ordered with a chain magazine for 48 / 64 tools; the FZ 15S table lists the 20-tool basket changer only.
Linear direct drives on X, Y and Z and direct drives on the A and C rotary axes, all water cooled together with the spindle. Rapids are 75 m/min (2,953 ipm) and acceleration is 10 m/s² per linear axis. The control is the Siemens SINUMERIK 840D sl.
