The Citizen Cincom B12E-V is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 12,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Citizen Cincom B12E-V Swiss-type lathe: 12 mm bar, 12,000 rpm main spindle, 12 mm back spindle at 6,000 rpm, 13 tools, 135 mm per chucking.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Citizen (Japan) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,150 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Maximum Machining Diameter | 12 mm dia. |
| Maximum Machining Length | 135 mm/chuck(R.G.B. in use 60 mm/chuck) |
| Maximum Drilling Diameter For Main Spindle | 6 mm dia. |
| Maximum Front Tapping Diameter Tap Die | M6 |
| Main Spindle Through Hole Diameter | 20 mm dia. |
| Max Spindle Speed | 12,000 rpm (R.G.B. 8,000 rpm) |
| Maximum Chuck Diameter Of Back Spindle | 12 mm dia. |
| Maximum Protrusion Length Of The Back Spindle Workpiece | 30 mm |
| Maximum Drilling Diameter In Back Machining Process | 5 mm dia. |
| Maximum Tapping Diameter In Back Machining Process | M3 |
| Sub Spindle Speed | 6,000 rpm |
| Number Of Tools To Be Mounted | 13 |
| Tool Size Turning Tool | 10 Sq.×120 mm or 60 mm |
| Tool Size Sleeve | 19.05 mm dia.(Option:20 mm dia.) |
| Rapid Feed Rate X Axis | 21 m/min |
| Rapid Feed Rate Y Axis | 21 m/min |
| Rapid Feed Rate Z Axis | 15 m/min |
| Rapid Feed Rate A2 Axis | 15 m/min |
| Motors For Spindle Drive | 2.2/3.7 kW |
| Motors For Back Spindle Drive | 1.0 kW |
| Motors For Cutting Coolant Oil | 0.18 kW |
| Power Requirement | 5.2 kVA |
| Load Operation Average Power | 4 kVA |
| Center Height | 1,000 mm |
| Machine Weight | 1,150 kg |
Our best estimate for the Citizen Cincom B12E-V is $80,000 - $140,000. This is an estimate for a swiss-type lathes in this class, not a quote from Citizen Machinery; configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/citizen-cincom-b12e-v#price; the request is passed to Citizen Machinery or an authorised dealer.
Rotary tools and tool count. The Cincom B12E-VI adds gang rotary tools rated for 5 mm drilling and M4 tapping at 4,500 rpm, driven by a 0.5 kW motor, and it mounts 16 tools against 13 on the B12E-V. Bar capacity of 12 mm, the 12,000 rpm main spindle, the 12 mm back spindle chuck and the 1,150 kg weight are the same on both.
With the R.G.B. in use the maximum machining length falls from 135 mm per chucking to 60 mm per chucking, and the main spindle maximum drops below 12,000 rpm to the separate R.G.B. figure Citizen lists. The trade suits short parts where bar remnant matters more than length per stroke.
The back spindle takes a 12 mm chuck, runs to 6,000 rpm on a 1.0 kW motor and allows up to 30 mm of the workpiece to protrude. Back machining is listed to 5 mm drilling and M3 tapping, which covers facing, chamfering, centre holes and small tapped holes on the cut-off end.
Citizen lists a power requirement of 5.2 kVA and an average of 4 kVA during load operation. The main spindle motor is 2.2/3.7 kW, the back spindle motor 1.0 kW and the coolant pump 0.18 kW. The machine weighs 1,150 kg with a centre height of 1,000 mm.
