The Dener DDS-2060 is an industrial-grade CNC Vertical Machining Centers (VMC) powered by the Standard CNC. a top spindle speed of 0 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener DDS-2060 ball screw press brake: 20 ton over 600 mm, 120 mm/sec approach, 150 mm stroke, 3.8 kW motor, 1,700 kg.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Vertical Machining Centers (VMC) |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Spindle Taper Interface | Standard |
| Approx. Machine Weight | 1,700 kg |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Bending Length | 600 mm (23.6 in) |
| Bending Capacity | 20 ton |
| Daylight | 375 mm (14.8 in) |
| Stroke | 150 mm (5.9 in) |
| Approach Speed | 120 mm/sec |
| Bending Speed | 20 mm/sec |
| Return Speed | 120 mm/sec |
| Motor Power | 3.8 kW |
| Machine Weight | 1,700 kg (3,748 lb) |
| Machine Length | 1,280 mm (50.4 in) |
| Machine Width | 1,410 mm (55.5 in) |
| Machine Height | 2,190 mm (86.2 in) |
The price estimate for the Dener DDS-2060 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-dds-2060#price; the request is passed to Dener or an authorised dealer.
20 ton across a bending length of 600 mm (23.6 in). The maximum stroke is 150 mm and the daylight 375 mm, driven by one 3.8 kW motor.
Yes. Standard equipment includes four axes (Y1, Y2, X, R), an ESA S 640 control unit and a DSP front laser safety system, the same list as for the larger DDS models.
1,700 kg (3,748 lb). It is 1,280 mm long, 1,410 mm wide and 2,190 mm high, so it can go into small rooms that a standard brake cannot enter.
One 3.8 kW motor drives the ram. Dener states 40% lower energy consumption than hydraulic presses for its ball screw press brakes.
