The Dener TTC-6 is an industrial-grade CNC Lathes & Turning Centers powered by the Standard CNC. a top spindle speed of 6,000 RPM, and a 3-axis kinematic layout. It supports standardized digital factory monitoring via MTConnect.
Dener TTC-6 CNC lathe: 6 inch chuck, 6,000 rpm, 305 mm turning diameter, 433 mm machining length, 45 mm bar capacity, FANUC 0İ TFP.
| Standardized Parameters & Ratings | |
|---|---|
| Manufacturer (Brand) | Dener (International) |
| Machine Type | CNC Lathes & Turning Centers |
| CNC Controller System | Standard CNC |
| Number of Controlled Axes | 3-Axis Simultaneous / Positioning |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor Rating | 11.0 kW |
| Spindle Taper Interface | Standard |
| Industrial IoT Protocol | MTConnect ANSI/MTC1.4 Compliant (Ethernet/TCP) |
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~5 m/min |
| Swing Diameter | 560 mm (22 in) |
| Max Turning Diameter | 305 mm (12 in) |
| Max Turning Length | 433 mm (17 in) |
| Chuck Size | 6 inch (152 mm) |
| Max Spindle Speed | 6,000 rpm |
| Spindle Motor Power | 11/20.4 kW |
| Spindle Bore | 56 mm (2.2 in) |
| Bar Capacity | 45 mm (1.8 in) |
The price estimate for the Dener TTC-6 is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/dener-ttc-6#price; the request is passed to Dener or an authorised dealer.
The maximum turning diameter is 305 mm (12 in) and the machining length 433 mm (17 in), under a swing diameter of 560 mm (22 in). The chuck is 6 inch (152 mm) and bar up to 45 mm (1.8 in) passes through the spindle.
The TTC-8 carries an 8 inch (203 mm) chuck, a 66 mm (2.6 in) spindle bore and 52 mm (2 in) of bar capacity, and its spindle speed is 4,500 rpm. The TTC-6 has the smaller chuck and bore but runs to 6,000 rpm and has a slightly longer machining length.
FANUC 0İ TFP is listed under standard equipment. Mitsubishi M80A-8A appears in the optional equipment list, so the control is a choice to make when ordering.
Dener prints a second column headed TTC-6(C) beside this model. It differs in two rows only: the TTC-6(C) lists a maximum turning diameter of 275 mm (10.8 in) and a machining length of 362 mm (14.3 in). The page does not explain the designation.
